Inkjet Printed Conductive Tracks for Printed Electronics

被引：101

作者：

Chen, S. -P. ^{[1
]}

Chiu, H. -L. ^{[1
]}

Wang, P. -H. ^{[1
]}

Liao, Y. -C. ^{[1
]}

机构：

[1] Natl Taiwan Univ, Dept Chem Engn, Taipei 10617, Taiwan

来源：

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY | 2015年 / 4卷 / 04期

关键词：

WALLED CARBON NANOTUBES; COPPER THIN-FILM; SILVER NANOPARTICLES; CONTACT-ANGLE; PATTERNS; FABRICATION; LIQUID; LINES; TEMPERATURE; DEPOSITION;

D O I：

10.1149/2.0061504jss

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This review briefly summarizes the recent development in fabrication of conductive tracks with inkjet printing technology. Special emphasis will be placed on material selection and printing procedures. Troubleshooting guidelines for frequent problems in inkjet printing methods, such as material selection, ink formulation, ink-substrate interaction, and post-treatment of inks, are elucidated in this article to fabricate conductive tracks or electrodes with well-defined patterns. Related applications and unsolved challenges are also briefly reviewed in this article. (C) The Author(s) 2015. Published by ECS. All rights reserved.

引用

页码：P3026 / P3033

页数：8

共 103 条

[1] Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes [J].

Ahn, Bok Y. ;

Duoss, Eric B. ;

Motala, Michael J. ;

Guo, Xiaoying ;

Park, Sang-Il ;

Xiong, Yujie ;

Yoon, Jongseung ;

Nuzzo, Ralph G. ;

Rogers, John A. ;

Lewis, Jennifer A. .

SCIENCE, 2009, 323 (5921) :1590-1593

[2] Electrical sintering of nanoparticle structures [J].

Allen, Mark L. ;

Aronniemi, Mikko ;

Mattila, Tomi ;

Alastalo, Ari ;

Ojanpera, Kimmo ;

Suhonen, Mika ;

Seppa, Heikki .

NANOTECHNOLOGY, 2008, 19 (17)

[3] Correlation between wetting properties and electrical performance of solution processed PEDOT:PSS/CNT nano-composite thin films [J].

Alshammari, Abdullah S. ;

Shkunov, Maxim ;

Silva, S. Ravi P. .

COLLOID AND POLYMER SCIENCE, 2014, 292 (03) :661-668

[4] Cu Salt Ink Formulation for Printed Electronics using Photonic Sintering [J].

Araki, Teppei ;

Sugahara, Tohru ;

Jiu, Jinting ;

Nagao, Shijo ;

Nogi, Masaya ;

Koga, Hirotaka ;

Uchida, Hiroshi ;

Shinozaki, Kenji ;

Suganuma, Katsuaki .

LANGMUIR, 2013, 29 (35) :11192-11197

[5] A desktop electrohydrodynamic jet printing system [J].

Barton, Kira ;

Mishra, Sandipan ;

Shorter, K. Alex ;

Alleyne, Andrew ;

Ferreira, Placid ;

Rogers, John .

MECHATRONICS, 2010, 20 (05) :611-616

[6] Ink-jet fabrication of electronic components [J].

Bidoki, S. M. ;

Lewis, D. M. ;

Clark, M. ;

Vakorov, A. ;

Millner, P. A. ;

McGorman, D. .

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2007, 17 (05) :967-974

[7] Highly conductive lines by plasma-induced conversion of inkjet-printed silver nitrate traces [J].

Bromberg, Vadim ;

Ma, Siyuan ;

Egitto, Frank D. ;

Singler, Timothy J. .

JOURNAL OF MATERIALS CHEMISTRY C, 2013, 1 (41) :6842-6849

[8] Silver Deposition on a Polymer Substrate Catalyzed by Singly Charged Monodisperse Copper Nanoparticles [J].

Byeon, Jeong Hoon ;

Roberts, Jeffrey T. .

ACS APPLIED MATERIALS & INTERFACES, 2012, 4 (05) :2515-2520

[9] Copper metallization of polymers by a palladium-free electroless process [J].

Charbonnier, M ;

Romand, M ;

Goepfert, Y ;

Léonard, D ;

Bouadi, M .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (18-19) :5478-5486

[10] Silver Conductive Features on Flexible Substrates from a Thermally Accelerated Chain Reaction at Low Sintering Temperatures [J].

Chen, Shih-Pin ;

Kao, Zhen-Kai ;

Lin, Jeng-Lung ;

Liao, Ying-Chih .

ACS APPLIED MATERIALS & INTERFACES, 2012, 4 (12) :7063-7067

← 1 2 3 4 5 6 7 8 9 10 →