Effect of Sintering Temperature on the Behavior of Oxygen Permeation for La0.6Sr0.4Co0.2Fe0.8O3-δ Tubular Membraness

被引:4
作者
Fan, Chuangang [1 ]
Wu, Riming [1 ]
Pei, Lizhai [1 ]
Zhang, Qianfeng [1 ]
机构
[1] Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243002, Peoples R China
来源
CHINESE CERAMICS COMMUNICATIONS | 2010年 / 105-106卷
关键词
perovskite; oxygen permeation; ceramic membrane; plastic extrusion;
D O I
10.4028/www.scientific.net/AMR.105-106.643
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
La(0.6)Sr(0.4)Co(0.2)Fe(0.8)O(3-delta) (LSCF) tubular membranes with relative density more than 95% were prepared using plastic extrusion method, and their oxygen permeation properties were characterized in steady state. It was found that the permeation properties were influenced apparently by the sintering temperature for the resulting LSCF membranes. The as prepared LSCF membrane sintered at 1300 degrees C had a permeation rate by 5-6 times higher than that sintered at 1250 degrees C. The XRD results showed that the as prepared LSCF membrane sintered at 1250 degrees C had the content of impurity more than that sintered at 1300 degrees C. Namely the reasonable elevation of sintering temperature can reduce the impurity in LSCF membranes, which was produced during green process, and the effect of impurity reduction can improve the transport capability of LSCF membranes made by plastic extrusion.
引用
收藏
页码:643 / 646
页数:4
相关论文
共 50 条
  • [31] Nano-structured cathodes based on La0.6Sr0.4Co0.2Fe0.8O3-δ for solid oxide fuel cells
    Kim, Ju Hee
    Park, Young Min
    Kim, HaeKyoung
    JOURNAL OF POWER SOURCES, 2011, 196 (07) : 3544 - 3547
  • [32] Investigation of precursors in the preparation of nanostructured La0.6Sr0.4Co0.2Fe0.8O3-δ via a modified combined complexing method
    Shao, Jing
    Tao, Youkun
    Wang, Jianxin
    Xu, Cheng
    Wang, Wei Guo
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 484 (1-2) : 263 - 267
  • [33] La0.6Sr0.4Co0.2Fe0.8O3-δ powder: a simple microstructure modification strategy for enhanced cathode electrochemical performance
    Ismail, Ismariza
    Osman, Nafisah
    Jani, Abdul Mutalib Md
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2020, 94 (02) : 435 - 447
  • [34] Oxygen permeation in symmetric and asymmetric La0.2Sr0.8Fe0.8Ta0.2O3-δ membranes
    Gurauskis, Jonas
    Lohne, Orjan Fossmark
    Lagergren, Dan Straete
    Wefring, Espen Tjomneland
    Wiik, Kjell
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (06) : 1427 - 1434
  • [35] Sintering and oxygen permeation studies of La0.6Sr0.4CoO2Fe0.8O3-δ ceramic membranes with improved purity
    Zou, Yuan
    Zhou, Wei
    Liu, Shaomin
    Shao, Zongping
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (15) : 2931 - 2938
  • [36] CuO/La0.6Sr0.4Co0.2Fe0.8O3-delta Powder by XPS
    Natile, Marta Maria
    Galenda, Alessandro
    Glisenti, Antonella
    SURFACE SCIENCE SPECTRA, 2008, 15 (01): : 14 - 22
  • [37] Surface enhanced performance of La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes by infiltration Pr-Ni-Mn-O progress
    Shi, Yongjing
    Wen, Yeting
    Huang, Kevin
    Xiong, Xiaolei
    Wang, Jie
    Liu, Meilin
    Ding, Dong
    Chen, Yu
    Liu, Tong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 902
  • [38] Oxygen permeation, electrical conductivity and stability of the perovskite oxide La0.2Sr0.8Cu0.4Co0.6O3-x
    Kim, S
    Yang, YL
    Christoffersen, R
    Jacobson, AJ
    SOLID STATE IONICS, 1997, 104 (1-2) : 57 - 65
  • [39] Electrochemical Investigation of Composite Nano La0.6Sr0.4Co0.2Fe0.8O3-δ Infiltration into a LSGM Scaffold Cathode on a LSGM Electrolyte
    Yoon, Byoung Young
    Bae, Joongmyeon
    SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 1933 - 1943
  • [40] The impact of sulfur contamination on the performance of La0.6Sr0.4Co0.2Fe0.8O3 - δ oxygen transport membranes
    Alqaheem, Yousef
    Thursfield, Alan
    Zhang, Guangru
    Metcalfe, Ian S.
    SOLID STATE IONICS, 2014, 262 : 262 - 265