Effect of Sintering Temperature on the Behavior of Oxygen Permeation for La0.6Sr0.4Co0.2Fe0.8O3-δ Tubular Membraness

被引：4
作者：
Fan, Chuangang [1 ]
Wu, Riming [1 ]
Pei, Lizhai [1 ]
Zhang, Qianfeng [1 ]
机构：
[1] Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243002, Peoples R China
来源：
CHINESE CERAMICS COMMUNICATIONS | 2010年 / 105-106卷
关键词：
perovskite; oxygen permeation; ceramic membrane; plastic extrusion;
D O I：
10.4028/www.scientific.net/AMR.105-106.643
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
La(0.6)Sr(0.4)Co(0.2)Fe(0.8)O(3-delta) (LSCF) tubular membranes with relative density more than 95% were prepared using plastic extrusion method, and their oxygen permeation properties were characterized in steady state. It was found that the permeation properties were influenced apparently by the sintering temperature for the resulting LSCF membranes. The as prepared LSCF membrane sintered at 1300 degrees C had a permeation rate by 5-6 times higher than that sintered at 1250 degrees C. The XRD results showed that the as prepared LSCF membrane sintered at 1250 degrees C had the content of impurity more than that sintered at 1300 degrees C. Namely the reasonable elevation of sintering temperature can reduce the impurity in LSCF membranes, which was produced during green process, and the effect of impurity reduction can improve the transport capability of LSCF membranes made by plastic extrusion.
引用
收藏
页码：643 / 646
页数：4
相关论文
共 50 条
  • [1] Fabrication of ultrathin La0.6Sr0.4Co0.2Fe0.8O3-δ hollow fibre membranes for oxygen permeation
    Zydorczak, Barbara
    Wu, Zhentao
    Li, K.
    CHEMICAL ENGINEERING SCIENCE, 2009, 64 (21) : 4383 - 4388
  • [2] Significant effects of sintering temperature on the performance of La0.6Sr0.4Co0.2Fe0.8O3-δ oxygen selective membranes
    Pingying Zeng
    Ran Ran
    Zhihao Chen
    Hongxia Gu
    Zongping Shao
    da Costa, J. C. Diniz
    Shaomin Liu
    JOURNAL OF MEMBRANE SCIENCE, 2007, 302 (1-2) : 171 - 179
  • [3] Poisoning effect of SO2 on the oxygen permeation behavior of La0.6Sr0.4Co0.2Fe0.8O3-δ perovskite hollow fiber membranes
    Gao, Jian
    Li, Liping
    Yin, Zhen
    Zhang, Jicai
    Lu, Sumin
    Tan, Xiaoyao
    JOURNAL OF MEMBRANE SCIENCE, 2014, 455 : 341 - 348
  • [4] A comparison of oxygen permeation and CO2 tolerance of La0.6Sr0.4CO0.2Fe0.6Nb0.2O3-δ and La0.6Sr0.4Fe0.8Nb0.2O3-δ ceramic membranes
    Gui, Liangqi
    Wan, Yanhong
    Wang, Ranran
    Wang, Zhihao
    He, Beibei
    Zhao, Ling
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 644 : 788 - 792
  • [5] Enhancement of oxygen permeation through La0.6Sr0.4Co0.2Fe0.8O3-δ hollow fibre membranes by surface modifications
    Tan, Xiaoyao
    Wang, Zhigang
    Liu, Hua
    Liu, Shaomin
    JOURNAL OF MEMBRANE SCIENCE, 2008, 324 (1-2) : 128 - 135
  • [6] Enhanced Oxygen Permeation of Pt-modified La0.6Sr0.4Co0.2Fe0.8O3-α Hollow Fibre Membranes
    Han, Dezhi
    Tan, Xiaoyao
    Yan, Zifeng
    Liu, Shaomin
    ADVANCES IN CHEMICAL ENGINEERING II, PTS 1-4, 2012, 550-553 : 630 - +
  • [7] Ferroelastic mechanical behaviour of porous La0.6Sr0.4Co0.2Fe0.8O3-δ
    Araki, Wakako
    Shionoya, Kazuto
    Arai, Yoshio
    CERAMICS INTERNATIONAL, 2016, 42 (13) : 14614 - 14617
  • [8] Elastic properties of freeze-cast La0.6Sr0.4Co0.2Fe0.8O3-δ
    Zou, Ying
    Araki, Wakako
    Balaguer, Maria
    Malzbender, Juergen
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (07) : 1651 - 1657
  • [9] Effect of Surface Modification on Electrochemical Performance of La0.6Sr0.4Co0.2Fe0.8O3-σ Cathode Material
    Cai C.
    Xie M.
    Liu Y.
    Xue K.
    Li S.
    An S.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2021, 49 (01): : 49 - 55
  • [10] Mechanical properties of ferroelastic La0.6Sr0.4Co0.2Fe0.8O3- with various porosities and pore sizes
    Islam, Md. Nurul
    Araki, Wakako
    Arai, Yoshio
    JOURNAL OF MATERIALS SCIENCE, 2019, 54 (07) : 5256 - 5265
12345