Comparative overview of five gear oils in mixed and boundary film lubrication

被引：55

作者：

Brandao, Jose A. ^{[1
]}

Meheux, Mathilde ^{[2
]}

Ville, Fabrice ^{[2
]}

Seabra, Jorge H. O. ^{[3
]}

Castro, Jorge ^{[4
]}

机构：

[1] Univ Porto, INEGI Inst Engn Mecan & Gestao Ind, P-4200465 Oporto, Portugal

[2] UMR CNRS INSA N05514 INSA Bat J DAlembert, Lab Mecan Contacts & Solides, F-69621 Villeurbanne, France

[3] Univ Porto, Fac Engn, P-4200465 Oporto, Portugal

[4] ISEP Inst Politecn Porto, P-4200072 Oporto, Portugal

来源：

TRIBOLOGY INTERNATIONAL | 2012年 / 47卷

关键词：

Gear oil; Mixed lubrication; Boundary lubrication; Stribeck curve; DIFFERENTIAL DEFLECTION METHOD; BASIC PROPERTIES; ROLLER BEARING; CONTACT; TRACTION; CURVES; PLAIN;

D O I：

10.1016/j.triboint.2011.10.007

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Stribeck curves were obtained from numerous traction tests performed under a wide range of operating conditions on several fully formulated gear oils with mineral, PAD and ester basestocks. These curves, which make use of a modified Stribeck parameter also presented here, were examined in order to analyse the influence of the operating conditions and of the gear oils on the coefficient of friction in mixed and boundary film lubrication. Particular attention was given to the coefficient of friction in boundary film lubrication. Theses Stribeck curves might be helpful in understanding the evolution of the coefficient of friction between gear teeth along the meshing line. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：50 / 61

页数：12

共 30 条

[1] Effect of Surface Pattern on Stribeck Curve [J].

Akbarzadeh, S. ;

Khonsari, M. M. .

TRIBOLOGY LETTERS, 2010, 37 (02) :477-486

[2]

[Anonymous], THESIS DELFT U TECHN

[3] Traction curves and rheological parameters of fully formulated gear oils [J].

Brandao, J. A. ;

Meheux, M. ;

Seabra, J. H. O. ;

Ville, F. ;

Castro, M. J. D. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J7) :577-593

[4]

BRANDAO JA, 2009, IRF2009 3 INT C INT

[5]

Brandao JA., 2010, INT C GEARS 2010, P177

[6] Surface initiated tooth flank damage. Part II: Prediction of micropitting initiation and mass loss [J].

Brandao, Jose A. ;

Seabra, Jorge H. O. ;

Castro, Jorge .

WEAR, 2010, 268 (1-2) :13-22

[7] Surface initiated tooth flank damage Part I: Numerical model [J].

Brandao, Jose A. ;

Seabra, Jorge H. O. ;

Castro, Jorge .

WEAR, 2010, 268 (1-2) :1-12

[8]

Castle R., 2003, Lubr Sci, V15, P253

[9] Global and local analysis of gear scuffing tests using a mixed film lubrication model [J].

Castro, J. ;

Seabra, J. .

TRIBOLOGY INTERNATIONAL, 2008, 41 (04) :244-255

[10] Effects of basestock and additive chemistry on traction testing [J].

Costello, MT .

TRIBOLOGY LETTERS, 2005, 18 (01) :91-97

← 1 2 3 →