Low-Temperature Differential Scanning Calorimetry of an Al-Mg-Si Alloy

被引:88
|
作者
Chang, C. S. T. [1 ]
Banhart, J. [2 ]
机构
[1] Helmholtz Ctr Berlin Mat & Energy, Inst Appl Mat, D-14109 Berlin, Germany
[2] Tech Univ Berlin, Inst Mat Sci & Technol, D-10623 Berlin, Germany
来源
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2011年 / 42A卷 / 07期
关键词
AGING BEHAVIOR; PRECIPITATION; ALUMINUM; STABILITY; CLUSTERS; CU;
D O I
10.1007/s11661-010-0596-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The clustering behavior at room temperature of a pure ternary Al-0.59 wt pct Mg-0.82 wt pct Si alloy was investigated by low-temperature differential scanning calorimetry (DSC). We find three clustering reactions that take place in two stages. The first two reactions are linked to each other and are completed after 1 hour. The third reaction starts around 1 hour after quenching and is completed after 2 weeks. Only the latter reaction exhibits a strong shift of the peak position of the thermal signal, indicating a change in the activation energy during aging at room temperature caused by changing solute supersaturation or increasing trapping of vacancies. The first two stages are closely linked to the known adverse effect of room-temperature preaging on the ensuing age-hardening step, since 60 to 80 pct of cluster formation is sufficient to establish the full negative effect.
引用
收藏
页码:1960 / 1964
页数:5
相关论文
共 50 条
  • [31] Solid Solution Hardening in Supersaturated Al-Mg-Si Alloy
    Takata, Ken
    Ushioda, Kohsaku
    Kaneko, Kenji
    Akiyoshi, Ryutaro
    Ikeda, Ken-ichi
    Hata, Satoshi
    Nakashima, Hideharu
    MATERIALS TRANSACTIONS, 2019, 60 (12) : 2525 - 2529
  • [32] The influence of temperature and storage time at RT on nucleation of the β" phase in a 6082 Al-Mg-Si alloy
    Marioara, CD
    Andersen, SJ
    Jansen, J
    Zandbergen, HW
    ACTA MATERIALIA, 2003, 51 (03) : 789 - 796
  • [33] Effect of Alloy Elements on Microstructures and Mechanical Properties in Al-Mg-Si Alloy
    Kato, Yoshikazu
    Hisayuki, Koji
    Sakaguchi, Masashi
    Higashi, Kenji
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 1521 - 1526
  • [34] Effect of chemical milling on low-cycle fatigue behavior of an Al-Mg-Si alloy
    Spear, Ashley D.
    Ingraffea, Anthony R.
    CORROSION SCIENCE, 2013, 68 : 144 - 153
  • [35] The effect of Mn on the high temperature flow stress of Al-Mg-Si alloys
    Liu, C. L.
    Wang, X.
    Parson, N. C.
    Poole, W. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 802
  • [36] Enhancement in Strength and Ductility of Al-Mg-Si alloy by Cryorolling followed by Warm rolling
    Rao, P. Nageswara
    Kaurwar, Amritha
    Singh, Dharmendra
    Jayaganthan, R.
    INTERNATIONAL CONFERENCE ON MATERIALS FOR ADVANCED TECHNOLOGIES (ICMAT2013), SYMPOSIUM W - ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS FOR PROTECTION, 2014, 75 : 123 - 128
  • [37] Sn-Induced Modification of the Precipitation Pathways upon High-Temperature Ageing in an Al-Mg-Si Alloy
    Xiang Xuemei
    Lai Yuxiang
    Liu Chunhui
    Chen Jianghua
    ACTA METALLURGICA SINICA, 2018, 54 (09) : 1273 - 1280
  • [38] Recrystallized cube grains in an Al-Mg-Si alloy dependent on prior cold rolling
    Falkinger, Georg
    Regl, Katharina
    Mitsche, Stefan
    MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (09) : 1081 - 1087
  • [39] Natural ageing clustering under different quenching conditions in an Al-Mg-Si alloy
    Yang, Zi
    Jiang, Xiaohe
    Zhang, Xingpu
    Liu, Meng
    Liang, Zeqin
    Leyvraz, David
    Banhart, John
    SCRIPTA MATERIALIA, 2021, 190 : 179 - 182
  • [40] Influence of Paint Baking Process on the Fracture Initiation of an Al-Mg-Si Alloy Sheet
    Gwak, S.
    Jang, I. J.
    Lee, J.
    Noh, W.
    Lee, M. G.
    Song, J. H.
    Jeong, C. Y.
    NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, 2018, 1063