Quantification of progressive structural integrity loss in masonry with Acoustic Emission-based damage classification

被引:22
|
作者
Shetty, Naveen [1 ]
Livitsanos, Georgios [3 ]
Van Roy, Nathalie [1 ]
Aggelis, Dimitrios G. [3 ]
Van Hemelrijck, Danny [3 ]
Wevers, Martine [2 ]
Verstrynge, Els [1 ]
机构
[1] Katholieke Univ Leuven, Bldg Mat & Bldg Technol Sect, Dept Civil Engn, Leuven, Belgium
[2] Katholieke Univ Leuven, Dept Mat Engn, Leuven, Belgium
[3] Vrije Univ Brussel, Dept Mech Mat & Construct, Brussels, Belgium
关键词
Brick masonry; Damage quantification; Cyclic compression; Acoustic Emission; Digital Image Correlation; BRICK MASONRY; HISTORICAL MASONRY; TESTS; ELASTICITY; STRENGTH; STRAIN; STONE; MODEL;
D O I
10.1016/j.conbuildmat.2018.10.215
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Determining the mechanical behaviour of masonry under compression remains challenging, as masonry is anisotropic and heterogeneous in nature. This paper focuses on an Acoustic Emission (AE)-based method to quantify the progressive damage in masonry under cyclic compressive loads. In this study, eight masonry walls were built in combination with four different mortar types. Results indicated that critical limits applied for AE-based damage quantification in concrete were too conservative for masonry under axial loading. However, it is the first time that these AE indices are investigated in masonry. Nevertheless, a good agreement was found between the progressive damage quantification with AE based methods and through deformation analysis from Digital Image Correlation (DIC) and Linear Variable Differential Transformers (LVDTs). (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:192 / 204
页数:13
相关论文
共 50 条
  • [31] Damage monitoring of masonry structure under in-situ uniaxial compression test using acoustic emission parameters
    Wu, Yanqi
    Li, Shengli
    Wang, Dongwei
    Zhao, Guanghui
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 215 : 812 - 822
  • [32] Acoustic Emission-based Micro-damage Monitoring of Key Parts of the Quanzhou Song Shipwreck: A Case Study
    Zhao, Jian
    Ma, Xueyi
    Liu, Jiahui
    Fei, Lihua
    Zhao, Dong
    Ma, Rongyu
    STUDIES IN CONSERVATION, 2025,
  • [33] Acoustic Emission-Based Damage Pattern Identification and Residual Strength Prediction of Glass-Fiber Reinforced Polymers
    Xu, Xiheng
    Bi, Xinyu
    Li, Zhuohan
    You, Yiliang
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2025, : 2427 - 2442
  • [34] Application of a priori knowledge-enhanced fuzzy clustering to acoustic emission-based damage identification of composite laminates
    Ma, Weijie
    Dong, Fan
    Li, Yazhi
    Li, Biao
    Zhou, Chunping
    APPLIED ACOUSTICS, 2025, 229
  • [35] Acoustic emission-based early fault detection in tapered roller bearings
    Usgame Sandoval, H. M.
    Pedraza Ramirez, C. A.
    Quiroga Mendez, J. E.
    INGENIERIA E INVESTIGACION, 2013, 33 (03): : 5 - 10
  • [36] Acoustic emission-based sound velocity characteristics of ceramic matrix composites
    Huang X.
    Wang B.
    Chang J.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2021, 38 (05): : 1517 - 1525
  • [37] A Bayesian Probabilistic Approach for Acoustic Emission-Based Rail Condition Assessment
    Wang, Junfang
    Liu, Xiao-Zhou
    Ni, Yi-Qing
    COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 2018, 33 (01) : 21 - 34
  • [38] Acoustic emission based fracture analysis in masonry under cyclic loading
    Shetty, N.
    Verstrynge, E.
    Wevers, M.
    Livitsanos, G.
    Aggelis, D.
    Van Hemelrijck, D.
    LIFE-CYCLE ANALYSIS AND ASSESSMENT IN CIVIL ENGINEERING: TOWARDS AN INTEGRATED VISION, 2019, : 3077 - 3084
  • [39] Practical Experiences to Know Making Acoustic Emission-Based SHM Successful
    Liebeton, Jonathan
    Soeffker, Dirk
    EUROPEAN WORKSHOP ON STRUCTURAL HEALTH MONITORING (EWSHM 2022), VOL 3, 2023, : 812 - 819
  • [40] Acoustic emission-based study to characterize the initiation of delamination in composite materials
    Fotouhi, Mohamad
    Najafabadi, Mehdi Ahmadi
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2016, 29 (04) : 519 - 537