Kinematic and Dynamic Modeling and Workspace Analysis of a Suspended Cable-Driven Parallel Robot for Schonflies Motions

被引：8

作者：

Wang, Ruobing ^{[1
]}

Xie, Yanlin ^{[1
]}

Chen, Xigang ^{[1
]}

Li, Yangmin ^{[1
]}

机构：

[1] Hong Kong Polytech Univ, Dept Ind & Syst Engn, Kowloon, Hong Kong, Peoples R China

来源：

MACHINES | 2022年 / 10卷 / 06期

关键词：

cable-driven parallel robot; kinematics; dynamics; workspace; DESIGN;

D O I：

10.3390/machines10060451

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In recent years, cable-driven parallel robots (CDPRs) have drawn more and more attention due to the properties of large workspace, large payload capacity, and ease of reconfiguration. In this paper, we present a kinematic and dynamic modeling and workspace analysis for a novel suspended CDPR which generates Schonflies motions. Firstly, the architecture of the robot is introduced, and the inverse and forward kinematic problems of the robot are solved through a geometrical approach. Then, the dynamic equation of the robot is derived by separately considering the moving platform and the drive trains. Based on the dynamic equation, the dynamic feasible workspace of the robot is determined under different values of accelerations. Finally, experiments are performed on a prototype of the robot to demonstrate the correctness of the derived models and workspace.

引用

页数：18

共 28 条

[11] Experimental comparison of five friction models on the same test-bed of the micro stick-slip motion system [J].

Liu, Y. F. ;

Li, J. ;

Zhang, Z. M. ;

Hu, X. H. ;

Zhang, W. J. .

MECHANICAL SCIENCES, 2015, 6 (01) :15-28

[12] Design and development of a Schonflies-motion parallel robot with articulated platforms and closed-loop passive limbs [J].

Meng, Qizhi ;

Liu, Xin-Jun ;

Xie, Fugui .

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2022, 77

[13] Forward Kinematics for Suspended Under-Actuated Cable-Driven Parallel Robots With Elastic Cables: A Neural Network Approach [J].

Mishra, Utkarsh A. ;

Caro, Stephane .

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2022, 14 (04)

[14] Cable-driven parallel robot modelling considering pulley kinematics and cable elasticity [J].

Paty, Thibaut ;

Binaud, Nicolas ;

Caro, Stephane ;

Segonds, Stephane .

MECHANISM AND MACHINE THEORY, 2021, 159

[15] Efficient Computation of the Workspace Boundary, Its Properties and Derivatives for Cable-Driven Parallel Robots [J].

Pott, Andreas .

COMPUTATIONAL KINEMATICS, 2018, 50 :190-197

[16] A geometrical workspace calculation method for cable-driven parallel manipulators on minimum tension condition [J].

Tang, Xiaoqiang ;

Wang, Weifang ;

Tang, Lewei .

ADVANCED ROBOTICS, 2016, 30 (16) :1061-1071

[17] An Overview of the Development for Cable-Driven Parallel Manipulator [J].

Tang, Xiaoqiang .

ADVANCES IN MECHANICAL ENGINEERING, 2014,

[18] Design and Programming for Cable-Driven Parallel Robots in the German Pavilion at the EXPO 2015 [J].

Tempel, Philipp ;

Schnelle, Fabian ;

Pott, Andreas ;

Eberhard, Peter .

MACHINES, 2015, 3 (03) :223-241

[19] Analysis and multi-objective optimal design of a planar differentially driven cable parallel robot [J].

Wang, Ruobing ;

Li, Yangmin .

ROBOTICA, 2021, 39 (12) :2193-2209

[20] Kinematic analysis and optimum design of a novel 2PUR-2RPU parallel robot [J].

Wang, Yaojun ;

Belzile, Bruno ;

Angeles, Jorge ;

Li, Qinchuan .

MECHANISM AND MACHINE THEORY, 2019, 139 :407-423

← 1 2 3 →