Crossed Dipole Frequency Doubling RFID TAG based on paper substrate and ink-jet printing technology

被引：0
|
作者：
Alimenti, F. [1 ]
Palazzari, V. [1 ]
Orecchini, G. [1 ]
Pinca, G. [2 ]
Mezzanotte, P. [1 ]
Tentzeris, M. M. [3 ]
Roselli, L. [1 ]
机构：
[1] Univ Perugia, DIEI, Elect & Informat Engn Dept, Via G Duranti 93, I-06125 Perugia, Italy
[2] Wireless Solut Srl, I-06065 Passignano sul Trasimeno, PG, Italy
[3] Georgia Inst Technol, Dept Elect & Comp Engn, GEDC, Atlanta, GA 30332 USA
来源：
2010 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST (MTT) | 2010年
关键词：
Paper; conductive ink; RFID; tag; diodes; crossef dipole; frequency multiplier;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A frequency doubler TAG structure realized on both plastic and conductive ink-jet printed paper is presented. It is based on the crossed dipole structure, but uses four diodes in a bridge configuration to form a balanced multiplier layout and incorporates the necessary DC path in a simple way within the structure. Measurements results are presented for both the plastic and paper structure, showing the feasibility of economic and green electronics on paper.
引用
收藏
页数：3
相关论文
共 9 条
  • [1] Ink-jet printing paper with improved waterfastness
    Jinzhen Shi
    Thomas P. Schuman
    O. Stoffer
    JCT Research, 2004, 1 : 225 - 234
  • [2] Ink-jet printing paper with improved waterfastness
    Shi, JZ
    Schuman, TP
    Stoffer, JO
    JCT RESEARCH, 2004, 1 (03): : 225 - 234
  • [3] RFID tag and RF structures on a paper substrate using inkjet-printing technology
    Yang, Li
    Rida, Amin
    Vyas, Rushi
    Tentzeris, Manos M.
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2007, 55 (12) : 2894 - 2901
  • [4] Polymer-based rectifying diodes on a glass substrate fabricated by ink-jet printing
    Liu, Y
    Cui, TH
    MACROMOLECULAR RAPID COMMUNICATIONS, 2005, 26 (04) : 289 - 292
  • [5] Ink-jet printing of Cu conductive ink on flexible substrate modified by oxygen plasma treatment
    Goo, Yong-Sung
    Lee, Young-In
    Kim, Namwoo
    Lee, Kun-Jae
    Yoo, Bongyoung
    Hong, Sung-Jei
    Kim, Joong-Do
    Choa, Yong-Ho
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 : S369 - S372
  • [6] Synthesis of gold nanoparticles with ultrasonic spray pyrolysis and its feasibility for ink-jet printing on paper
    Shariq M.
    Marić N.
    Gorše G.K.
    Kargl R.
    Rudolf R.
    Rudolf, Rebeka (rebeka.rudolf@um.si), 2018, Bentham Science Publishers (10) : 102 - 109
  • [7] The Synthesis and Characterization of Metal Nanoparticles Using a Modified Electrolysis Method for Conductive Ink in Ink-Jet Printing Technology
    Lee, Kun-Jae
    Lim, Borami
    Jeong, Yun-Ho
    Hong, Sung-Jei
    Lee, Kyu Bok
    Kim, Ki-Do
    Kim, Jongryul
    Kim, Hee Taik
    Choa, Yong-Ho
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2008, 8 (10) : 5062 - 5065
  • [8] Verifying Sensitivity of RFID Tags Manufactured by Conductive Ink Printed on Paper Versus an RFID Tag Made of Copper on Hard Substrate
    Valmiro, R.
    Barbin, S. E.
    2015 IEEE-APS TOPICAL CONFERENCE ON ANTENNAS AND PROPAGATION IN WIRELESS COMMUNICATIONS (APWC), 2015, : 1403 - 1405
  • [9] A novel immunosensor for the monitoring of PSA using binding of biotinylated antibody to the prostate specific antigen based on nano-ink modified flexible paper substrate: efficient method for diagnosis of cancer using biosensing technology
    Farschi, Fatemeh
    Saadati, Arezoo
    Hasanzadeh, Mohammad
    HELIYON, 2020, 6 (07)
1