Transition velocities in the riser of a circulating fluidized bed

被引:17
作者
Balasubramanian, N
Srinivasakannan, C
Basha, CA
机构
[1] Cent Electrochem Res Inst, Karaikkudi 630006, Tamil Nadu, India
[2] Univ Sains Malaysia, Sch Chem Engn, Nibong Tebal 14300, Palau Penang, Malaysia
关键词
circulating fluidized bed; flow regime transition; transport velocity; chocking velocity;
D O I
10.1163/1568552053750198
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
We attempted to study the hydrodynamics and flow regime transitions in a circulating fluidized bed (CFB). In conventional gas-solids fluidization, the flow regimes include the fixed bed, bubbling fluidization and turbulent fluidization, in which the regimes mainly depend on the gas velocity. However, in a CFB, the flow regime depends on both the solids circulation rate and gas velocity. The flow regimes in a CFB include the high-velocity fluidized bed and pneumatic conveying. Experiments were conducted in a column of 0.052 m internal diameter and 1.2 m long covering a wide range of operating conditions. The transport velocity was estimated by emptying time and extrapolation techniques. It was noticed from the present experimental observations that Geldart B-type particles move more or less as individual particles, while Geldart A-type particles have a tendency to form clusters. Empirical correlations have been proposed for the transport velocity U-tr and the chocking velocity U-ch. A qualitative map of different flow regimes of a gas-solid fluidized bed has been proposed based transition velocities.
引用
收藏
页码:247 / 260
页数:14
相关论文
共 23 条
[11]   REGIME CLASSIFICATION OF MACROSCOPIC GAS SOLID FLOW IN A CIRCULATING FLUIDIZED-BED RISER [J].
HIRAMA, T ;
TAKEUCHI, H ;
CHIBA, T .
POWDER TECHNOLOGY, 1992, 70 (03) :215-222
[12]  
Kunii D., 1969, FLUIDIZATION ENG
[13]  
Kwauk M., 1986, CIRCULATING FLUIDIZE, P33
[14]   MECHANICS OF VERTICAL-MOVING FLUIDIZED SYSTEMS [J].
LAPIDUS, L ;
ELGIN, JC .
AICHE JOURNAL, 1957, 3 (01) :63-68
[15]  
Li Y., 1980, FLUIDIZATION, P537
[16]   A transient method for characterizing flow regimes in a circulating fluid bed [J].
Monazam, ER ;
Shadle, LJ .
POWDER TECHNOLOGY, 2004, 139 (01) :89-97
[17]   Flow regimes and axial pressure profiles in a circulating fluidized bed [J].
Namkung, W ;
Kim, SW ;
Kim, SD .
CHEMICAL ENGINEERING JOURNAL, 1999, 72 (03) :245-252
[18]  
Richardson JF., 1954, Trans. Inst. Chem. Eng, V32, P35, DOI [10.11475/sabo1973.59.5_23, DOI 10.11475/SABO1973.59.5_23, DOI 10.1016/S0263-8762(97)80006-8]
[19]   Hydrodynamic modeling of circulating fluidized beds [J].
Smolders, K ;
Baeyens, J .
ADVANCED POWDER TECHNOLOGY, 1998, 9 (01) :17-38
[20]  
SXHNITZLEIN MG, 1988, CHEM ENG SCI, V43, P2605