Recrystallization Law of Ti-IF Steel During Annealing Process

被引：0
作者：
Feng, Yanqing [1 ,2 ]
Gao, Zhiguo [2 ]
Wang, Fuming [1 ]
机构：
[1] Univ Sci & Technol Beijing, Beijing 100083, Peoples R China
[2] Baotou Iron & Steel Grp Co Ltd, Baotou, Peoples R China
来源：
NEW MATERIALS, APPLICATIONS AND PROCESSES, PTS 1-3 | 2012年 / 399-401卷
关键词：
Ti-IF steel; Annealing; Recrystallization; HIGH-STRENGTH STEELS; TEXTURE FORMATION; PRECIPITATION; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMR.399-401.2301
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Recrystallization law was investigated at different annealing processes. The results showed that the annealing temperature was a main effect factor on the properties of Ti-IF steel. Nominal recrystallization temperature of the samples was evaluated as 620 degrees C. Simulated batch annealing was performed by two-stage heating. Determined recrystallization temperature was 660 degrees C, the recrystallization of samples heated at 660 degrees C was completed in 68min. For 800 degrees C, the equiaxial recrystallized grains were obtained. Simulated continuous annealing by rapidly heating to different temperatures, samples were held for 100s and then cooled in air. Recrystallization nucleation was not observed until 660 degrees C. The occurrence of secondary recrystallization was observed at 900 degrees C.
引用
收藏
页码：2301 / +
页数：2
相关论文
共 50 条
[41]   Recrystallization Behavior of a Heavily Deformed Austenitic Stainless Steel During Iterative Type Annealing [J].
B. Ravi Kumar ;
Sailaja Sharma .
Metallurgical and Materials Transactions A, 2014, 45 :6027-6038
[42]   Modelling mechanical property recovery of a linepipe steel in annealing process [J].
Li, H. ;
Lin, J. ;
Dean, T. A. ;
Wen, S. W. ;
Bannister, A. C. .
INTERNATIONAL JOURNAL OF PLASTICITY, 2009, 25 (06) :1049-1065
[43]   Effect of coiling temperature on the evolution of texture in ferritic rolled Ti-IF steel [J].
Wang, Zhaodong ;
Guo, Yanhui ;
Xue, Wenying ;
Liu, Xianghua ;
Wang, Guodong .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2007, 23 (03) :337-341
[44]   The interaction between precipitation and recrystallization during annealing of cold rolled AA6111 [J].
Go, J ;
Poole, WJ ;
Militzer, M ;
Wells, MA .
THERMEC'2003, PTS 1-5, 2003, 426-4 :291-296
[45]   Effect of Coiling Temperature on the Evolution of Texture in Ferritic Rolled Ti-IF Steel [J].
Zhaodong WANG .
Journal of Materials Science & Technology, 2007, (03) :337-341
[46]   Effect of inter-critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel [J].
Mittal, Mayank ;
Nanda, Tarun ;
Kumar, B. Ravi ;
Singh, Vishal .
MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (11) :1231-1238
[47]   Effect of annealing process on microstructure and electrical conductivity of cold-rolled Ti microalloyed conductive steel [J].
Tang, Xingchang ;
Kuang, Chuan ;
Zhou, Weilian ;
Chen, Kexuan ;
Huang, Jiankang ;
Yv, Xiaoquan ;
Wang, Canglong ;
La, Peiqing .
MATERIALS CHARACTERIZATION, 2023, 201
[48]   Modeling of the Dynamic Recrystallization of Ti Microalloyed High-Strength Steel [J].
Zhou, Xiaoguang ;
Wang, Xixiang ;
Li, Xin ;
Liu, Zhenyu .
STEEL RESEARCH INTERNATIONAL, 2022, 93 (06)
[49]   Effect of the initial microstructure on the recrystallization of a cold rolled TRIP - Assisted steel during intercritical annealing [J].
Petrov, R ;
Kestens, L ;
Houbaert, Y .
RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 2001, :1107-1112
[50]   Ultra-high strength attributed to retardation of recrystallization during intercritical annealing in cold-rolled (V,Nb) microalloyed 5Mn steel [J].
Wu, Hao ;
Guo, Hui ;
Hu, Bin ;
Enomoto, Masato ;
Shang, Chengjia .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 794
12345