Recrystallization Law of Ti-IF Steel During Annealing Process

被引：0
作者：
Feng, Yanqing [1 ,2 ]
Gao, Zhiguo [2 ]
Wang, Fuming [1 ]
机构：
[1] Univ Sci & Technol Beijing, Beijing 100083, Peoples R China
[2] Baotou Iron & Steel Grp Co Ltd, Baotou, Peoples R China
来源：
NEW MATERIALS, APPLICATIONS AND PROCESSES, PTS 1-3 | 2012年 / 399-401卷
关键词：
Ti-IF steel; Annealing; Recrystallization; HIGH-STRENGTH STEELS; TEXTURE FORMATION; PRECIPITATION; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMR.399-401.2301
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Recrystallization law was investigated at different annealing processes. The results showed that the annealing temperature was a main effect factor on the properties of Ti-IF steel. Nominal recrystallization temperature of the samples was evaluated as 620 degrees C. Simulated batch annealing was performed by two-stage heating. Determined recrystallization temperature was 660 degrees C, the recrystallization of samples heated at 660 degrees C was completed in 68min. For 800 degrees C, the equiaxial recrystallized grains were obtained. Simulated continuous annealing by rapidly heating to different temperatures, samples were held for 100s and then cooled in air. Recrystallization nucleation was not observed until 660 degrees C. The occurrence of secondary recrystallization was observed at 900 degrees C.
引用
收藏
页码：2301 / +
页数：2
相关论文
共 50 条
  • [21] Texture evolution of commercial pure Ti during cold rolling and recrystallization annealing
    Jiang, Hai-tao
    Liu, Ji-xiong
    Mi, Zhen-li
    Zhao, Ai-min
    Bi, Yan-jun
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2012, 19 (06) : 530 - 535
  • [22] Texture evolution of commercial pure Ti during cold rolling and recrystallization annealing
    Hai-tao Jiang
    International Journal of Minerals Metallurgy and Materials, 2012, 19 (06) : 530 - 535
  • [23] Texture evolution of commercial pure Ti during cold rolling and recrystallization annealing
    Hai-tao Jiang
    Ji-xiong Liu
    Zhen-li Mi
    Ai-min Zhao
    Yan-jun Bi
    International Journal of Minerals, Metallurgy, and Materials, 2012, 19 : 530 - 535
  • [24] Texture Evolution in Ferritic Rolled Ti-IF Steel During Cold Rolling
    Zhang Peng
    Guo Yan-hui
    Wang Zhao-dong
    Wang Guo-dong
    Liu Xiang-hua
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 (01) : 44 - +
  • [25] Texture evolution in ferritic rolled Ti-IF steel during cold rolling
    Peng Zhang
    Yan-hui Guo
    Zhao-dong Wang
    Guo-dong Wang
    Xiang-hua Liu
    Journal of Iron and Steel Research International, 2010, 17 : 44 - 48
  • [26] A study of recrystallization and phosphorus segregation during annealing of a rephosphorized interstitial free (IF) steel
    Dionne, S
    Essadiqi, E
    McMahon, G
    Martin, P
    Galvani, C
    Szpunar, J
    Jeong, HT
    41ST MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, VOL 37, 1999, 37 : 235 - 243
  • [27] Evolution of inclusions in Ti stabilized ultra low carbon steel(Ti-IF) steel
    BAO Yanping
    BaosteelTechnicalResearch, 2010, 4(S1) (S1) : 25 - 25
  • [28] Surface cleanliness evaluation in Ti stabilised ultralow carbon (Ti-IF) steel
    Wang, M.
    Bao, Y. -P.
    Cui, H.
    Wu, W. -S.
    Wu, H. -J.
    Chen, B.
    Ji, C. -X.
    Zhu, G. -S.
    IRONMAKING & STEELMAKING, 2011, 38 (05) : 386 - 390
  • [29] The Effect of Annealing Temperature on the Properties and Second-Phase Particles of 0.4mm Galvanized Ti-IF Steel
    Li, Feng
    Lv, Jiashun
    Yang, Honggang
    Zhou, Fang
    Zhang, Leng
    Wang, Endong
    MATERIALS ENGINEERING AND MECHANICAL AUTOMATION, 2014, 442 : 58 - +
  • [30] RECRYSTALLIZATION DURING ANNEALING OF A COLD ROLLED LEAN DUPLEX STAINLESS STEEL
    Herrera, Clara
    Ponge, Dirk
    Raabe, Dierk
    RECRYSTALLIZATION AND GRAIN GROWTH IV, 2012, 715-716 : 550 - 550
12345