Recrystallization Law of Ti-IF Steel During Annealing Process

被引：0
|
作者：
Feng, Yanqing [1 ,2 ]
Gao, Zhiguo [2 ]
Wang, Fuming [1 ]
机构：
[1] Univ Sci & Technol Beijing, Beijing 100083, Peoples R China
[2] Baotou Iron & Steel Grp Co Ltd, Baotou, Peoples R China
来源：
NEW MATERIALS, APPLICATIONS AND PROCESSES, PTS 1-3 | 2012年 / 399-401卷
关键词：
Ti-IF steel; Annealing; Recrystallization; HIGH-STRENGTH STEELS; TEXTURE FORMATION; PRECIPITATION; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMR.399-401.2301
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Recrystallization law was investigated at different annealing processes. The results showed that the annealing temperature was a main effect factor on the properties of Ti-IF steel. Nominal recrystallization temperature of the samples was evaluated as 620 degrees C. Simulated batch annealing was performed by two-stage heating. Determined recrystallization temperature was 660 degrees C, the recrystallization of samples heated at 660 degrees C was completed in 68min. For 800 degrees C, the equiaxial recrystallized grains were obtained. Simulated continuous annealing by rapidly heating to different temperatures, samples were held for 100s and then cooled in air. Recrystallization nucleation was not observed until 660 degrees C. The occurrence of secondary recrystallization was observed at 900 degrees C.
引用
收藏
页码：2301 / +
页数：2
相关论文
共 50 条
  • [11] Investigation on the Recrystallization Mechanism in Warm-Rolled Ti-IF Steel
    Yan-hui Guo
    Zhao-dong Wang
    Li-qun Wei
    Journal of Materials Engineering and Performance, 2014, 23 : 1214 - 1222
  • [12] Texture Evolution in a Warm-Rolled Ti-IF Steel During Cold Rolling and Annealing
    Yanhui Guo
    Zhaodong Wang
    Jishan Xu
    Guodong Wang
    Xianghua Liu
    Journal of Materials Engineering and Performance, 2009, 18 : 378 - 384
  • [13] Texture Evolution in a Warm-Rolled Ti-IF Steel During Cold Rolling and Annealing
    Guo, Yanhui
    Wang, Zhaodong
    Xu, Jishan
    Wang, Guodong
    Liu, Xianghua
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (04) : 378 - 384
  • [14] Effect of batch annealing on the secondary working embrittlement of TI-IF steel
    Wang, L
    Jin, L
    Lu, JX
    43RD MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 2001, 39 : 603 - 608
  • [15] Effect of batch annealing on the secondary working embrittlement of Ti-IF steel
    Li, W.
    Lei, J.
    Xin, L.J.
    Iron and Steelmaker (I and SM), 2002, 29 (08): : 61 - 63
  • [16] Texture Evolution During Annealing in Warm-Rolled and Cold-Rolled Ti-IF Steel
    Guo, Yan-hui
    Wang, Zhao-dong
    Wang, Guo-dong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (03) : 417 - 421
  • [17] Microstructure and Microtexture Evolution during Batch Annealing of Warm-Rolled Ti-IF Steel Sheets
    Han, Futao
    Wang, Zuocheng
    Jing, Cainian
    Liu, Xiaomin
    Su, Jie
    Zhang, Shaoyan
    2013 INTERNATIONAL CONFERENCE ON PROCESS EQUIPMENT, MECHATRONICS ENGINEERING AND MATERIAL SCIENCE, 2013, 331 : 443 - +
  • [18] Texture Evolution During Annealing in Warm-Rolled and Cold-Rolled Ti-IF Steel
    Yan-hui Guo
    Zhao-dong Wang
    Guo-dong Wang
    Journal of Materials Engineering and Performance, 2011, 20 : 417 - 421
  • [19] Effect of annealing temperature on phosphorus segregation at grain boundary in a Ti-IF steel
    Song, Xinli
    Yuan, Zexi
    Jia, Juan
    Fan, Lixia
    Peng, Kun
    Li, Meng
    Li, Pinghe
    FRONTIERS OF ADVANCED MATERIALS AND ENGINEERING TECHNOLOGY, PTS 1-3, 2012, 430-432 : 724 - +
  • [20] Phosphorus segregation behavior at the grain boundary in a Ti-IF steel after annealing
    Song, X. L.
    Yuan, Z. X.
    Jia, J.
    Wang, D.
    Fan, L. X.
    SCRIPTA MATERIALIA, 2010, 63 (04) : 446 - 448
12345