Experimental study on spatial mechanical properties of grout anchor lap joints

被引：7

作者：

Wan, Lijun ^{[1
,2
]}

Zhao, Yongqi ^{[1
,2
]}

Yu, Maopei ^{[1
,2
]}

Li, Na ^{[1
,2
]}

Sun, Xianglong ^{[3
]}

机构：

[1] Northeast Forestry Univ, Inst Cold Reg Sci & Engn, Harbin 150040, Peoples R China

[2] Northeast Forestry Univ, Sch Traff & Transportat, Harbin 150040, Peoples R China

[3] Northeast Forestry Univ, Sch Civil Engn, Harbin 150040, Peoples R China

来源：

STRUCTURES | 2022年 / 44卷

关键词：

Grouted anchorage connection; Pull-out test; Finite element analysis; Anchoring performance; Stress distribution; CONNECTIONS; SPLICE; BEHAVIOR;

D O I：

10.1016/j.istruc.2022.08.057

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

To study the anchoring performance of non-concentric and multi-medium lap joints of grout anchors, pull-out experiments of 18 groups of specimens were implemented. The main focus of this study is the influence of steel bar diameter and anchorage length on the bond and anchorage performance when the diameter of metal bellows and spacing of spiral stirrups are fixed. Qualitative and quantitative analyses are conducted to experi-mentally ascertain the mechanical safety of structures. The finite element method is employed to replicate crack development and mechanically simulate the segment model. The simulation results are analyzed and compared with experimental data. When the anchorage length is 35d-40d (where d is the diameter of the embedded steel bar), no component is damaged, indicating that the anchorage length is stable and reliable. However, when the anchorage length is less than 15d, slip failure occurs. In this work, a comprehensive description of the mutual restriction and force transmission variation law of each component of the node under the action of stress based on the strain distribution analysis of the multi-media coupling model is provided. Moreover, optimization sug-gestions for the structure are proposed. The results of this study provide experimental support for the application of this type of joint in prefabricated building structures.

引用

页码：728 / 739

页数：12

共 26 条

[1]

Aldin Hosseini Seyed Jamal, 2022, CONSTR BUILD MATER, V327

[2]

[Anonymous], 2010, Code for design of concrete structures

[3]

[Anonymous], 2015, GB504482015

[4]

[Anonymous], 2018, Specifications for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts

[5] Exploratory investigation of grouted bar-in-duct connections under direct tensile load [J].

Elsayed, M. ;

Nehdi, M. L. ;

Provost-Smith, D. J. ;

Eissa, O. S. .

CONSTRUCTION AND BUILDING MATERIALS, 2018, 183 :311-324

[6] Effects of spiral confinement to the bond behavior of deformed reinforcement bars subjected to axial tension [J].

Hosseini, Seyed Jamal Aldin ;

Rahman, Ahmad Baharuddin Abd. .

ENGINEERING STRUCTURES, 2016, 112 :1-13

[7] Bond behavior of spirally confined splice of deformed bars in grout [J].

Hosseini, Seyed Jamal Aldin ;

Abd Rahman, Ahmad Baharuddin ;

Osman, Mohd Hanim ;

Saim, Aziz ;

Adnan, Azlan .

CONSTRUCTION AND BUILDING MATERIALS, 2015, 80 :180-194

[8] Tensile capacity of grouted splice sleeves [J].

Ling, Jen Hua ;

Abd Rahman, Ahmad Baharuddin ;

Ibrahim, Izni Syahrizal ;

Hamid, Zuhairi Abdul .

ENGINEERING STRUCTURES, 2016, 111 :285-296

[9] Experimental and numerical investigation on mechanical properties of grouted-sleeve splices [J].

Liu, Chao ;

Pan, Liufeng ;

Liu, Hai ;

Tong, Huawei ;

Yang, Yubing ;

Chen, Wei .

CONSTRUCTION AND BUILDING MATERIALS, 2020, 260

[10] Experimental study on anchorage performance of steel bar-corrugated pipe grouted connection [J].

Ma, Jinfeng ;

Zhu, Jianing ;

Bai, Guoliang ;

Zheng, Wei .

STRUCTURES, 2021, 34 :1834-1842

← 1 2 3 →