Natural Fibre Reinforced Composites Opportunities and Challenges

被引:39
作者
Hill, Callum [1 ]
Hughes, Mark [2 ]
机构
[1] Napier Univ, Ctr Timber Engn, Edinburgh EH10 5DT5, Midlothian, Scotland
[2] Aalto Univ, Sch Sci & Technol, Dept Forest Prod Technol, Aalto 00076, Finland
关键词
Natural Fibres; Micro-Compressive Defects; Microfibrils; Micromechanics; Kink Bands; Dislocations; Water Sorption; Chemical Modification; Acetylation; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; FRACTURE-BEHAVIOR; ELASTIC-MODULUS; WATER-VAPOR; POLYESTER; FLAX; WOOD; DISLOCATIONS; TOUGHNESS;
D O I
10.1166/jbmb.2010.1079
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
This paper briefly reviews the history of research into natural fibre reinforced composites and gives an overview of some of the challenges facing the research community in improving their performance. Given the good mechanical properties exhibited by fibres such as flax and hemp, this performance has not however been translated to that of the composites, in terms of strength and particularly toughness properties. The reasons for this are examined and possible solutions to this problem discussed. The effect of moisture on the properties of natural fibres is also evaluated. Due to the abundance of hydroxyl groups associated with the fibre cell wall polymers, the fibres are susceptible to the presence of moisture which can lead to swelling and changes in mechanical properties. These disadvantages can be overcome by chemical modification. Some potential modifications are examined and their effect on fibre properties illustrated.
引用
收藏
页码:148 / 158
页数:11
相关论文
共 50 条
  • [31] A study of the mechanical properties of natural fibre reinforced composites
    J. A. M. Ferreira
    C. Capela
    J. D. Costa
    Fibers and Polymers, 2010, 11 : 1181 - 1186
  • [32] Hemp Fibre Reinforced Composites
    Schwarzova, Ivana
    Stevulova, Nadezda
    Melichar, Tomas
    10TH INTERNATIONAL CONFERENCE ENVIRONMENTAL ENGINEERING (10TH ICEE), 2017,
  • [33] Flame retardant characteristics of natural fibre reinforced polymer composites: A thematic review
    Muralidharan, Nivedhitha Durgam
    Subramanian, Jeyanthi
    Rajamanickam, Sathish Kumar
    Krishnasamy, Prabu
    Thiagamani, Senthil Muthu Kumar
    Khan, Anish
    POLYMER COMPOSITES, 2024, 45 (14) : 12530 - 12558
  • [34] Thermal degradation and fire retardant behaviour of natural fibre reinforced polymeric composites- A comprehensive review
    Hiremath, Vinayak S.
    Reddy, D. Mallikarjuna
    Mutra, Rajasekhara Reddy
    Sanjeev, Aditya
    Dhilipkumar, Thulasidhas
    Naveen, J.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 4053 - 4063
  • [35] Damping analysis of nonwoven natural fibre-reinforced polypropylene composites used in automotive interior parts
    Hadiji, Hajer
    Assarar, Mustapha
    Zouari, Wajdi
    Pierre, Floran
    Behlouli, Karim
    Zouari, Bassem
    Ayad, Rezak
    POLYMER TESTING, 2020, 89
  • [36] Towards selection chart of flame retardants for natural fibre reinforced polypropylene composites
    Elsabbagh, A.
    Attia, T.
    Ramzy, A.
    Steuernagel, L.
    Ziegmann, G.
    COMPOSITES PART B-ENGINEERING, 2018, 141 : 1 - 8
  • [37] Material Selection of a Natural Fibre Reinforced Polymer Composites using an Analytical Approach
    Noryani, M.
    Sapuan, S. M.
    Mastura, M. T.
    Zuhri, M. Y. M.
    Zainudin, E. S.
    JOURNAL OF RENEWABLE MATERIALS, 2019, 7 (11) : 1165 - 1179
  • [38] Effect of water on the mechanical and thermal properties of natural fibre reinforced hybrid composites
    de Seixas, G. B.
    de Queiroz, H. F. M.
    Neto, J. S. S.
    Banea, M. D.
    JOURNAL OF COMPOSITE MATERIALS, 2023, 57 (11) : 1941 - 1957
  • [39] Machinability of natural-fibre-reinforced polymer composites: Conventional vs ultrasonically-assisted machining
    Wang, D.
    Onawumi, P. Y.
    Ismail, S. O.
    Dhakal, H. N.
    Popov, I.
    Silberschmidt, V. V.
    Roy, A.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 119 : 188 - 195
  • [40] Natural fibre reinforced vegetable-oil based polyurethane composites: a review
    Bhaskaran, Swathy Krishna
    Boga, Karteek
    Arukula, Ravi
    Gaddam, Sashivinay Kumar
    JOURNAL OF POLYMER RESEARCH, 2023, 30 (08)