Condensation Heat Transfer Characteristics of a Separate Heat Pipe in Cool Storage Air-Conditioning Systems

被引：3
|
作者：
Liu, Xu [1 ]
Fang, Gui-Yin [1 ]
Chen, Zhi [1 ]
机构：
[1] Nanjing Univ, Sch Phys, Nanjing 210093, Jiangsu, Peoples R China
来源：
CHEMICAL ENGINEERING & TECHNOLOGY | 2011年 / 34卷 / 03期
基金：
中国国家自然科学基金;
关键词：
Condensation; Cool storage; Heat pipe; Heat transfer; Liquid films;
D O I：
10.1002/ceat.201000339
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The condensation characteristics model of the condensation part of a separate heat pipe in a cool storage air-conditioning system is presented. In this model, the shear stress between gas and liquid two-phase flow is considered. R134a is taken as working medium of the heat pipe. The liquid film thickness, shear stress, and heat transfer coefficient of the heat pipe are calculated. The effect of the shear stress on the film thickness and the variations of the heat transfer coefficient with heat pipe diameter and heat flux are analyzed. Influences of the heat pipe incline angle and heat flux on the heat transfer coefficient are also considered. The results indicate that the liquid film based on this model is thinner and the condensation heat transfer coefficient is larger than that based on the Nusselt model.
引用
收藏
页码：415 / 421
页数：7
相关论文
共 50 条
  • [41] Investigation of heat transfer characteristics in heat pipe heat exchanger for space application
    Ramkumar P.
    Boddapati C.
    A. S V.
    Thilagapathy G.
    Kajavali A.
    Interactions, 245 (1)
  • [42] Heat Transfer Characteristics of a Reservoir Embedded Loop Heat Pipe (2nd Report, Influence of Noncondensable Gas on Heat Transfer Characteristics)
    Ishikawa, Hiroaki
    Ogushi, Tetsuro
    Nomura, Takehide
    Noda, Hiroyuki
    Kawasaki, Haruo
    Yabe, Takahiro
    HEAT TRANSFER-ASIAN RESEARCH, 2007, 36 (08): : 459 - 473
  • [43] Experimental study on performance and condensation characteristics of induction radiant air-conditioning system
    Si Q.
    Xu G.
    Zhang X.
    Zhang, Xiaosong (rachpe@seu.edu.cn), 2018, Southeast University (48): : 213 - 219
  • [44] Dynamic charging characteristics modeling of heat storage device with heat pipe
    Liu, Xu
    Fang, Guiyin
    Chen, Zhi
    APPLIED THERMAL ENGINEERING, 2011, 31 (14-15) : 2902 - 2908
  • [45] Operation characteristics of air-air heat pipe inserted plate heat exchanger for heat recovery
    Xue, Lianzheng
    Ma, Guoyuan
    Zhou, Feng
    Wang, Lei
    ENERGY AND BUILDINGS, 2019, 185 : 66 - 75
  • [46] Phase change heat transfer characteristics of an additively manufactured wick for heat pipe applications
    Jafari, Davoud
    Wits, Wessel W.
    Geurts, Bernard J.
    APPLIED THERMAL ENGINEERING, 2020, 168
  • [47] Optical evaluation and analysis of an internal low-concentrated evacuated tube heat pipe solar collector for powering solar air-conditioning systems
    Nkwetta, Dan Nchelatebe
    Smyth, Mervyn
    Zacharopoulos, Aggelos
    Hyde, Trevor
    RENEWABLE ENERGY, 2012, 39 (01) : 65 - 70
  • [48] Evaporation and condensation heat transfer in a heat pipe with a sintered-grooved composite wick
    Li, Yong
    He, Heng-fei
    Zeng, Zhi-xin
    APPLIED THERMAL ENGINEERING, 2013, 50 (01) : 342 - 351
  • [49] Heat Transfer Characteristics outside the Condenser of a Rotating Heat Pipe Grinding Wheel with a Lateral Air Impinging Jet
    Chen, Jiajia
    Zhang, Liyong
    Fu, Yucan
    Qian, Ning
    Jiang, Huafei
    Yang, Lin
    JOURNAL OF THERMAL SCIENCE, 2021, 30 (02) : 493 - 503
  • [50] Heat Transfer Characteristics outside the Condenser of a Rotating Heat Pipe Grinding Wheel with a Lateral Air Impinging Jet
    Jiajia Chen
    Liyong Zhang
    Yucan Fu
    Ning Qian
    Huafei Jiang
    Lin Yang
    Journal of Thermal Science, 2021, 30 : 493 - 503
12345