Curing kinetics and thermal characterization of epoxy resin cured with amidodicarboxylic acids

被引:26
作者
Mustata, Fanica [1 ]
Tudorachi, Nita [1 ]
机构
[1] Petru Poni Inst Macromol Chem, Gr Ghica Voda Alley,41A, Iasi 700487, Romania
关键词
Amidodicarboxylic acids; Epoxy resins; Curing kinetics; Thermal stability; BIOBASED EPOXY; DIGLYCIDYL ETHER; BISPHENOL-A; CORN-OIL; ROSIN; AGENTS; DECOMPOSITION; COMPONENTS; ANHYDRIDE;
D O I
10.1016/j.applthermaleng.2017.07.037
中图分类号
O414.1 [热力学];
学科分类号
摘要
Thermal properties and the curing kinetics of a system based on DGEBA as epoxy resin and two amidodicarboxylic acids as hardeners (epoxy ring/carboxylic proton at 1/0.7 molar ratio) were investigated using differential scanning calorimetry (DSC) and simultaneous TG/FT-IR/MS analysis. "Thermokinetics-3" software (Netzsch) was used to simulate the curing reaction mechanisms and thermal degradation of the crosslinked products, simultaneously with the kinetic parameters determination. According to data obtained with this program, the crosslinking processes occurred in two or three steps while the thermal processes occurred in three steps, depending on the chemical structure of the crosslinking agents. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:285 / 296
页数:12
相关论文
共 46 条
[1]   Development of amine-acid cured Annona squamosa oil epoxy anticorrosive polymeric coatings [J].
Ahmad, S ;
Naqvi, F ;
Sharmin, E ;
Verma, KL .
PROGRESS IN ORGANIC COATINGS, 2006, 55 (03) :268-275
[2]  
[Anonymous], 1990, 2162 EC IEC CENTR OF
[3]   Synthesis and characterization of tetra-functional epoxy resins from rosin [J].
Atta, AM ;
Mansour, R ;
Abdou, MI ;
El-Sayed, AM .
JOURNAL OF POLYMER RESEARCH, 2005, 12 (02) :127-138
[4]   Epoxy resins from rosin acids: synthesis and characterization [J].
Atta, AM ;
Mansour, R ;
Abdou, MI ;
Sayed, AM .
POLYMERS FOR ADVANCED TECHNOLOGIES, 2004, 15 (09) :514-522
[5]   New heat stable and processable poly(amide-ether-imide)s derived from 5-(4-trimellitimidophenoxy)-1-trimellitimido naphthalene and various diamines [J].
Behniafar, Hossein ;
Ghorbani, Mostafa .
POLYMER DEGRADATION AND STABILITY, 2008, 93 (03) :608-617
[6]  
Cantwell W.J., 1993, Chemistry and Technology of Epoxy
[7]   Evaluation of the biological properties of soluble chitosan and chitosan microspheres [J].
CarrenoGomez, B ;
Duncan, R .
INTERNATIONAL JOURNAL OF PHARMACEUTICS, 1997, 148 (02) :231-240
[8]   VISCOSITY CHARACTERISTICS OF SOME PARA-NONYLPHENOL FORMALDEHYDE NOVOLAC EPOXY-RESINS [J].
CASCAVAL, CN ;
MUSTATA, F ;
ROSU, D .
ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1993, 209 :157-166
[9]   Investigation on the thermal degradation and kinetic parameters of innovative insulation materials using TGA-MS [J].
Chetehouna, Khaled ;
Belayachi, Naima ;
Rengel, Borja ;
Hoxha, Dashnor ;
Gillard, Philippei .
APPLIED THERMAL ENGINEERING, 2015, 81 :177-184
[10]   Thermokinetic analysis of two-step curing reactions in melt - Part I. Investigation of low molecular model systems [J].
Edelmann, M. ;
Gedan-Smolka, M. ;
Heinrich, G. ;
Lehmann, D. .
THERMOCHIMICA ACTA, 2007, 452 (01) :59-64