Classification of Design Methodologies to Minimize Vibrations in Gears and Bearings in the 21st Century: A Review

被引:6
作者
Tuiran Villalba, Rafae [1 ]
Maury Ramirez, Heriberto [2 ]
Aguila Estrada, Hector [3 ]
机构
[1] Univ Pontificia Bolivariana Secc Monteria, Fac Mech Engn, Cra 6 97A-99, Monteria 230002, Colombia
[2] Univ Norte, Dept Mech Engn, Km 5 Via Puerto Colombia, Barranquilla 081007, Colombia
[3] Univ Magallanes, Dept Mech Engn, Ave Bulnes 01855, Punta Arenas 6200000, Chile
关键词
mechanical vibrations; mechanical transmission; design methodology; gear vibration; OF-THE-ART; SPIRAL BEVEL GEARS; FAULT-DIAGNOSIS METHODS; CONTACT RATIO; TRANSMISSION ERROR; HELICAL GEARS; PROFILE MODIFICATION; ROTATING MACHINERY; DYNAMIC-RESPONSE; JOURNAL BEARING;
D O I
10.3390/machines9100212
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Associated vibrations in mechanical power transmission elements such as gears and bearings significantly contribute to the dynamic behavior of the system to which they belong. Most research in this field describes measurements and signal processing methods to determine the effect of some design modifications. However, the number of investigations that try to solve the problem from the design stage is much smaller. The following study presents a review of the trends in the analysis of vibrations of power transmission elements and their relationship to the use of systematic design methodologies in the principal power transmission elements. A revision is shown in design considerations to prevent mechanical vibrations or reduce them to acceptable levels. The effects in terms of improvement in reducing vibrations of the most important works that have taken into account the vibrations in design stages are shown. The results show the importance of considering the mechanical vibrations in the design of power transmission elements. Moreover, the analysis of the state of the art shows the areas to be investigated that contemplate the development or application of formal design methodologies that take into account mechanical vibrations.</p>
引用
收藏
页数:18
相关论文
共 130 条
[1]   Review on dynamic and quasi-static buffeting response of transmission lines under synoptic and non-synoptic winds [J].
Aboshosha, Haitham ;
Elawady, Amal ;
El Ansary, Ayman ;
El Damatty, Ashraf .
ENGINEERING STRUCTURES, 2016, 112 :23-46
[2]   Tire and Engine Sources Contribution to Vehicle Interior Noise and Vibration Exposure Levels [J].
Abouel-Seoud, Shawki .
ARCHIVES OF ACOUSTICS, 2019, 44 (02) :201-214
[3]   Procedure for optimum design of a two-stage spur gear system [J].
Abuid, BA ;
Ameen, YM .
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2003, 46 (04) :1582-1590
[4]   On the modelling of the dynamic characteristics of aerostatic bearing films: From stability analysis to active compensation [J].
Al-Bender, Farid .
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2009, 33 (02) :117-126
[5]   An analytical study of the effect of the contact ratio on the spur gear dynamic response [J].
Andersson, A .
JOURNAL OF MECHANICAL DESIGN, 2000, 122 (04) :508-514
[6]   Aspects of structural health and condition monitoring of offshore wind turbines [J].
Antoniadou, I. ;
Dervilis, N. ;
Papatheou, E. ;
Maguire, A. E. ;
Worden, K. .
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2015, 373 (2035)
[7]   Computerized integrated approach for design and stress analysis of spiral bevel gears [J].
Argyris, J ;
Fuentes, A ;
Litvin, FL .
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2002, 191 (11-12) :1057-1095
[8]   A review of active vibration and noise suppression of plate-like structures with piezoelectric transducers [J].
Aridogan, Ugur ;
Basdogan, Ipek .
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2015, 26 (12) :1455-1476
[9]   New methodology to reduce the transmission error of the spiral bevel gears [J].
Astoul, J. ;
Mermoz, E. ;
Sartor, M. ;
Linares, J. M. ;
Bernard, A. .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2014, 63 (01) :165-168
[10]   A REVIEW ON APPLICATION OF DYNAMIC PARAMETERS OF JOURNAL BEARING FOR VIBRATION AND CONDITION MONITORING [J].
Balm, T. Narendiranath ;
Raj, T. Manvel ;
Lakshmanan, T. .
JOURNAL OF MECHANICS, 2015, 31 (04) :391-416