Curing Characteristics, Mechanical and Morphological Properties of Kenaf Fibre/Halloysite Nanotubes Hybrid-Filled Natural Rubber Compounds

被引:15
|
作者
Ismail, H. [1 ]
Norjulia, A. M. [1 ]
Ahmad, Z. [1 ]
机构
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Div Polymer, Perai, Pulau Pinang, Malaysia
关键词
Halloysite nanotubes; Hybrid filler; Kenaf; Morphology; Natural rubber; Rubber-filler interaction; Tensile properties; COUPLING AGENT; GLASS-FIBER; COMPOSITES;
D O I
10.1080/03602551003773171
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Natural rubber compounds were prepared with different kenaf/HNT ratio loading i.e., 30/0, 20/10, 15/15, 10/20, 0/30 (phr/phr). The compounds were cured at 150 degrees C according to its t90. Curing characteristic, tensile properties, fatigue, rubber-filler interaction and morphological properties of the compounds were tested. Curing characteristics show that scorch time and cure time increased with increasing of HNT ratio loading while minimum and maximum torque decreased. When HNT ratio loading was increased, tensile strength and elongation at break and fatigue life increased while tensile modulus decreased. Swelling measurement and morphological study showed that better rubber-filler interaction was obtained with higher HNT ratio loading.
引用
收藏
页码:938 / 943
页数:6
相关论文
共 50 条
  • [31] Properties enhancement in multiwalled carbon nanotube-magnetite hybrid-filled polypropylene natural rubber nanocomposites through functionalization and processing methods
    Kong, Ing
    Ahmad, Sahrim Haji
    Shanks, Robert
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2016, 23 (03) : 257 - 267
  • [32] Curing characteristics and mechanical properties of alkali-treated grass-fiber-filled natural rubber composites and effects of bonding agent
    De, Debasish
    De, Debapriya
    Adhikari, Basudam
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 101 (05) : 3151 - 3160
  • [33] Comparative Studies on the Mechanical Properties of Natural Rubber and Natural Rubber Filled With Multi-Walled Carbon Nanotubes
    Ismail, R.
    Ibrahim, A.
    Rusop, M.
    Adnan, A.
    8TH INTERNATIONAL CONFERENCE ON NANOSCIENCE AND NANOTECHNOLOGY 2017 (NANO-SCITECH 2017), 2018, 1963
  • [34] Influence of benzyl esters of vegetable oils on curing, mechanical and dynamic properties of silica filled natural rubber and styrene-butadiene rubber compounds
    Kaesaman, Azizon
    Boontawee, Hasleena
    Chewchanwuttiwong, Sopa
    Nakasone, Charoen
    EXPRESS POLYMER LETTERS, 2022, 16 (05): : 540 - 556
  • [35] Cure characteristics, tensile properties and swelling behaviour of recycled rubber powder-filled natural rubber compounds
    Ismail, H
    Nordin, R
    Noor, AM
    POLYMER TESTING, 2002, 21 (05) : 565 - 569
  • [36] Nanomodified ZnO in Natural Rubber and Its Effects on Curing Characteristics and Mechanical Properties
    Pornprasit, Philaiwan
    Pechurai, Worawan
    Chiangraeng, Natthiti
    Randorn, Chamnan
    Chandet, Nopakarn
    Mungkornasawakul, Pitchaya
    Nimmanpipug, Piyarat
    CHIANG MAI JOURNAL OF SCIENCE, 2018, 45 (05): : 2195 - 2200
  • [37] The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber
    De, D
    De, D
    Adhikari, B
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2004, 15 (12) : 708 - 715
  • [38] Potency of Urea-Treated Halloysite Nanotubes for the Simultaneous Boosting of Mechanical Properties and Crystallization of Epoxidized Natural Rubber Composites
    Surya, Indra
    Waesateh, Kamaruddin
    Saiwari, Sitisaiyidah
    Ismail, Hanafi
    Othman, Nadras
    Hayeemasae, Nabil
    POLYMERS, 2021, 13 (18)
  • [39] The effect of partial replacement of carbon black (CB) with halloysite nanotubes (HNTs) on the properties of CB/HNT-filled natural rubber nanocomposites
    Ismail, Hanafi
    Salleh, Siti Zuliana
    Ahmad, Zulkifli
    JOURNAL OF ELASTOMERS AND PLASTICS, 2013, 45 (05) : 445 - 455
  • [40] Investigation on the mechanical and ageing properties of acrylic rubber reinforced halloysite nanotubes/carbon black hybrid composites
    Senthilvel, K.
    Rathinam, N.
    Prabu, B.
    Kumar, A. Arul Jeya
    JOURNAL OF ELASTOMERS AND PLASTICS, 2021, 53 (06) : 653 - 671