Curing Characteristics, Mechanical and Morphological Properties of Kenaf Fibre/Halloysite Nanotubes Hybrid-Filled Natural Rubber Compounds

被引：15

作者：

Ismail, H. ^{[1
]}

Norjulia, A. M. ^{[1
]}

Ahmad, Z. ^{[1
]}

机构：

[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Div Polymer, Perai, Pulau Pinang, Malaysia

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2010年 / 49卷 / 09期

关键词：

Halloysite nanotubes; Hybrid filler; Kenaf; Morphology; Natural rubber; Rubber-filler interaction; Tensile properties; COUPLING AGENT; GLASS-FIBER; COMPOSITES;

D O I：

10.1080/03602551003773171

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Natural rubber compounds were prepared with different kenaf/HNT ratio loading i.e., 30/0, 20/10, 15/15, 10/20, 0/30 (phr/phr). The compounds were cured at 150 degrees C according to its t90. Curing characteristic, tensile properties, fatigue, rubber-filler interaction and morphological properties of the compounds were tested. Curing characteristics show that scorch time and cure time increased with increasing of HNT ratio loading while minimum and maximum torque decreased. When HNT ratio loading was increased, tensile strength and elongation at break and fatigue life increased while tensile modulus decreased. Swelling measurement and morphological study showed that better rubber-filler interaction was obtained with higher HNT ratio loading.

引用

页码：938 / 943

页数：6

共 50 条

[21] Natural rubber composites filled with zinc ferrite nanoparticles: focus on structural, morphological, curing, thermal and mechanical properties
K. Parvathi
M. T. Ramesan
Research on Chemical Intermediates, 2022, 48 : 129 - 144
[22] Natural rubber composites filled with zinc ferrite nanoparticles: focus on structural, morphological, curing, thermal and mechanical properties
Parvathi, K.
Ramesan, M. T.
RESEARCH ON CHEMICAL INTERMEDIATES, 2022, 48 (01) : 129 - 144
[23] Effect of Epoxidized Natural Rubber on Mechanical Properties of Epoxy Reinforced Kenaf Fibre Composites
Abu Bakar, M. A.
Ahmad, S.
Kuntjoro, W.
PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 2012, 20 (01): : 129 - 137
[24] PHYSICO-MECHANICAL PROPERTIES OF RUBBER SEED SHELL CARBON - FILLED NATURAL RUBBER COMPOUNDS
Ekebafe, L. O.
Imanah, J. E.
Okieimen, F. E.
CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY, 2010, 16 (02) : 149 - 156
[25] Tensile and Morphological Properties on Kenaf Core or Bast Filled Natural Rubber Latex Foam (NRLF)
Kudori, S. N. I.
Ismail, H.
Khimi, S. R.
MATERIALS TODAY-PROCEEDINGS, 2019, 17 : 609 - 615
[26] Curing characteristics and mechanical properties of natural rubber/chloroprene rubber and epoxidized natural rubber/chloroprene rubber blends
Ismail, H
Leong, HC
POLYMER TESTING, 2001, 20 (05) : 509 - 516
[27] THE CURE CHARACTERISTICS AND MECHANICAL BEHAVIOUR OF BAMBOO FIBRE FILLED NATURAL RUBBER COMPOSITE
Zainathul Akhmar, Salim Abdul Salim
Nurul Aizan, Mohd Zaini
Mohd Muhiddin, Ahmad
Siti Sarah, Jamil
Zainuddin, Nor Hazwani
PROGRESS IN POLYMER AND RUBBER TECHNOLOGY, 2013, 812 : 53 - 59
[28] Curing characteristics, mechanical properties and morphology of butyl rubber filled with ground tire rubber (GTR)
Formela, Krzysztof
Haponiuk, Jozef T.
IRANIAN POLYMER JOURNAL, 2014, 23 (03) : 185 - 194
[29] Effect of halloysite nanotubes on curing behavior, mechanical, and microstructural properties of acrylonitrile-butadiene rubber nanocomposites
Ismail, Hanafi
Ahmad, Hazwani Syaza
JOURNAL OF ELASTOMERS AND PLASTICS, 2014, 46 (06) : 483 - 498
[30] Enhancing curing, mechanical and electrical properties of epoxidized natural rubber nanocomposites with graphene and carbon nanotubes hybrid fillers
Siriwas, Thananya
Pichaiyut, Skulrat
Susoff, Markus
Petersen, Svea
Nakason, Charoen
JOURNAL OF MATERIALS SCIENCE, 2023, 58 (40) : 15676 - 15695

← 1 2 3 4 5 →