Curing Characteristics, Mechanical and Morphological Properties of Kenaf Fibre/Halloysite Nanotubes Hybrid-Filled Natural Rubber Compounds

被引：15

作者：

Ismail, H. ^{[1
]}

Norjulia, A. M. ^{[1
]}

Ahmad, Z. ^{[1
]}

机构：

[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Div Polymer, Perai, Pulau Pinang, Malaysia

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2010年 / 49卷 / 09期

关键词：

Halloysite nanotubes; Hybrid filler; Kenaf; Morphology; Natural rubber; Rubber-filler interaction; Tensile properties; COUPLING AGENT; GLASS-FIBER; COMPOSITES;

D O I：

10.1080/03602551003773171

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Natural rubber compounds were prepared with different kenaf/HNT ratio loading i.e., 30/0, 20/10, 15/15, 10/20, 0/30 (phr/phr). The compounds were cured at 150 degrees C according to its t90. Curing characteristic, tensile properties, fatigue, rubber-filler interaction and morphological properties of the compounds were tested. Curing characteristics show that scorch time and cure time increased with increasing of HNT ratio loading while minimum and maximum torque decreased. When HNT ratio loading was increased, tensile strength and elongation at break and fatigue life increased while tensile modulus decreased. Swelling measurement and morphological study showed that better rubber-filler interaction was obtained with higher HNT ratio loading.

引用

页码：938 / 943

页数：6

共 50 条

[1] THE EFFECT OF KENAF FIBRE LOADING ON CURING CHARACTERISTICS AND MECHANICAL PROPERTIES OF WASTE TYRE DUST/KENAF FIBRE HYBRID FILLER FILLED NATURAL RUBBER COMPOUNDS
Ismail, Hanafi
Omar, Nurul Farhana
Othman, Nadras
BIORESOURCES, 2011, 6 (04): : 3742 - 3756
[2] Curing Characteristics, Mechanical, Thermal, and Morphological Properties of Halloysite Nanotubes (HNTs)-Filled Natural Rubber Nanocomposites
Ismail, Hanafi
Salleh, Siti Zuliana
Ahmad, Zulkifli
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2011, 50 (07) : 681 - 688
[3] Curing Characteristics and Mechanical Properties of Rattan Filled Natural Rubber Compounds
Muniandy, Komethi
Ismail, Hanafi
Othman, Nadras
COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 845 - 850
[4] The Effects of Untreated and Treated Kenaf Loading on the Properties of Kenaf Fibre-Filled Natural Rubber Compounds
Ismail, H.
Norjulia, A. M.
Ahmad, Z.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (05) : 519 - 524
[5] Preparation and properties of recycled poly(ethylene terephthalate) powder/halloysite nanotubes hybrid-filled natural rubber composites
Nabil, H.
Ismail, H.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2015, 28 (03) : 415 - 430
[6] Curing Characteristics, Fatigue Life and Morphological Properties of Natural Rubber Nanocomposites with Halloysite Nanotubes (HNTs)/Carbon Black (CB) Hybrid Filler
Salleh, Siti Zuliana
Ismail, Hanafi
Ahmad, Zulkifli
COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 957 - 962
[7] The effect of chitosan loading on the curing characteristics, mechanical and morphological properties of chitosan-filled natural rubber (NR), epoxidised natural rubber (ENR) and styrene-butadiene rubber (SBR) compounds
Ismail, H.
Shaari, S. M.
Othman, N.
POLYMER TESTING, 2011, 30 (07) : 784 - 790
[8] Mechanical and Morphological Properties of Kenaf Powder Filled Natural Rubber Latex Foam
Karim, Ahmad Fikri Abdul
Ismail, Hanafi
Ariff, Zulkifli Mohamad
PROCEEDINGS OF THE 23RD SCIENTIFIC CONFERENCE OF MICROSCOPY SOCIETY MALAYSIA (SCMSM 2014), 2015, 1669
[9] Curing characteristics and tensile properties of White Fly Ash filled natural rubber compounds
Mokhtar, Hisyam
Nordin, Razif
Shamsudin, Saidatulakmar
Noriman, N. Z.
PROCESS AND ADVANCED MATERIALS ENGINEERING, 2014, 625 : 753 - +
[10] Mechanical, thermal, morphological, and curing properties of geopolymer filled natural rubber composites
Yangthong, Hassarutai
Pichaiyut, Skulrat
Jumrat, Saysunee
Wisunthorn, Suwaluk
Nakason, Charoen
JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (15)

← 1 2 3 4 5 →