Deposition of a B-modified silicide coating for Nb-Si based alloy oxidation protection

被引:51
作者
Shao, Wei [1 ]
Wang, Wan [1 ]
Zhou, Chungen [1 ]
机构
[1] Beijing Univ Aeronaut & Astronaut, Dept Mat Sci & Engn, Minist Educ, Key Lab Aerosp Mat & Performance, Beijing 100191, Peoples R China
基金
中国国家自然科学基金;
关键词
Intermetallics; Metal coatings; Superalloys; Oxidation; PACK-CEMENTATION METHOD; ULTRAHIGH TEMPERATURE ALLOY; DIFFUSION COATINGS; DEGREES-C; RESISTANCE; BEHAVIOR; MICROSTRUCTURE; GROWTH; INTERMETALLICS; COMPOSITES;
D O I
10.1016/j.corsci.2016.06.020
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A B-modified silicide coating was prepared on the Nb-Si based alloy by Si-TiB2 co-deposition at 1300 degrees C for 10 h. The results show that the two-layer coating is composed of a (Nb, X)Si-2 (X represents Al, Cr, Ti and Hf) + NbTiB4 outer layer and a (Nb, X)Si-2 + Cr2Nb inner layer. Static oxidation tests indicate that the mass gain of B-modified silicide coating was 2.39 mg/cm(2) after oxidation at 1250 degrees C for 100 h. The good oxidation resistance is attributed to the formation of a continuous and dense scale mainly consisting of glassy borosilicate. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:786 / 792
页数:7
相关论文
共 33 条
[1]   Deposition of Cr-modified silicide coatings on Nb-Si system intermetallics [J].
Chen, Chen ;
Zhou, Chungen ;
Gong, Shengkai ;
Li, Shusuo ;
Zhang, Yue ;
Xu, Huibin .
INTERMETALLICS, 2007, 15 (5-6) :805-809
[2]   Simultaneous coating of Si and B on Nb-Si-B alloys by a halide activated pack cementation method and oxidation behaviors of the alloys with coatings at 1100 °C [J].
Cheng, Jingchang ;
Yi, Seonghoon ;
Park, Joon Sik .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 644 :975-981
[3]   THERMAL-OXIDATION OF NIOBIUM SILICIDE THIN-FILMS [J].
CHOW, TP ;
HAMZEH, K ;
STECKL, AJ .
JOURNAL OF APPLIED PHYSICS, 1983, 54 (05) :2716-2719
[4]   Development and growth of boron-modified and germanium-doped titanium-silicide diffusion coatings by the halide-activated, pack-cementation method [J].
Cockeram, B ;
Rapp, RA .
OXIDATION OF METALS, 1996, 45 (3-4) :375-425
[5]   Isothermal and cyclic oxidation resistance of boron-modified and germanium-doped silicide coatings for titanium alloys [J].
Cockeram, B ;
Rapp, RA .
OXIDATION OF METALS, 1996, 45 (5-6) :427-468
[6]  
Cockeram BV, 1995, SURF COAT TECH, V76, P20, DOI 10.1016/0257-8972(95)02492-1
[7]   Thermodynamic modeling of the Nb-Si system [J].
Fernandes, PB ;
Coelho, GC ;
Ferreira, F ;
Nunes, CA ;
Sundman, B .
INTERMETALLICS, 2002, 10 (10) :993-999
[8]  
Guo JM, 2008, ACTA METALL SIN, V44, P574
[9]   The effects of melting technologies on the microstructures and properties of Nb-16Si-22Ti-2Al-2Hf-17Cr alloy [J].
Li, Xiaojian ;
Chen, Haifeng ;
Sha, Jiangbo ;
Zhang, Hu .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (23) :6140-6152
[10]   Oxidation behavior of boron-modified Mo5Si3 at 800 degrees-1300 degrees C [J].
Meyer, MK ;
Akinc, M .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1996, 79 (04) :938-944