Flexural behaviour of pumice lightweight concrete reinforced with end-hooked steel fibres

被引：28

作者：

Christidis, K., I ^{[1
]}

Badogiannis, E. G. ^{[1
]}

Mintzoli, C. ^{[1
]}

机构：

[1] Natl Tech Univ Athens NTUA, Sch Civil Engn, Reinforced Concrete Lab, 5 Iroon Polytech St, Athens 15773, Greece

来源：

STRUCTURES | 2021年 / 33卷

关键词：

Pumice lightweight concrete; Hook-ended steel fibres; Compressive strength; Flexural strength; Flexural post-crack behaviour; DYNAMIC-MECHANICAL PROPERTIES; HIGH-STRENGTH; AGGREGATE CONCRETE; POLYPROPYLENE FIBER; SHEAR BEHAVIOR; TOUGHNESS; PERFORMANCE; INSULATION;

D O I：

10.1016/j.istruc.2021.06.090

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

A study on the mechanical properties of end-hooked steel-fibre reinforced pumice lightweight concrete is presented. Typical compression and three-point bending tests were performed in a reference lightweight concrete batch, where two different steel end-hooked fibres were added in four different contents 0.5%, 0.75%, 1.0%, and 1.5% per volume. The experimental results were evaluated in both strength and deformation terms and further processed, in order to illustrate the influence of fibres to the strength and deformation capacity, in correlation to the geometrical aspect ratio and the volume fraction of the fibres. Compressive strength, but mainly flexural strength was found to be significantly enhanced, especially, in terms of post crack behaviour. An effort to model the post-crack behaviour in flexure was also conducted. A multi-phase constitutive law is proposed which describes the Stress - Crack Mouth Opening Displacement behaviour of steel-fibre reinforced pumice lightweight concrete in correlation to the mechanical properties of plain lightweight concrete.

引用

页码：3835 / 3847

页数：13

共 54 条

[11]

ASTM (American Society for Testing and Materials), 2015, STANDARD TEST METHOD, DOI [10.1520/F2439-06R11.certification, DOI 10.1520/F2439-06R11.CERTIFICATION]

[12]

ASTM. American Society for Testing and Materials), 2017, C138C138M17A ASTM

[13] Evaluation of the mechanical behavior of pumice lightweight concrete reinforced with steel and polypropylene fibers [J].

Badogiannis, E. G. ;

Christidis, K., I ;

Tzanetatos, G. E. .

CONSTRUCTION AND BUILDING MATERIALS, 2019, 196 :443-456

[14] Monotonic and cyclic flexural tests on lightweight aggregate concrete beams [J].

Badogiannis, E. G. ;

Kotsovos, M. D. .

EARTHQUAKES AND STRUCTURES, 2014, 6 (03) :317-334

[15] Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete [J].

Balendran, RV ;

Zhou, FP ;

Nadeem, A ;

Leung, AYT .

BUILDING AND ENVIRONMENT, 2002, 37 (12) :1361-1367

[16] Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates [J].

Campione, G ;

Miraglia, N ;

Papia, M .

MATERIALS AND STRUCTURES, 2001, 34 (238) :201-210

[17] Monotonic and cyclic behaviour of lightweight concrete beams with and without steel fiber reinforcement [J].

Caratelli, Angelo ;

Meda, Alberto ;

Rinaldi, Zila .

CONSTRUCTION AND BUILDING MATERIALS, 2016, 122 :23-35

[18] Punching shear behavior of lightweight fiber reinforced concrete slabs [J].

Caratelli, Angelo ;

Imperatore, Stefania ;

Meda, Alberto ;

Rinaldi, Zila .

COMPOSITES PART B-ENGINEERING, 2016, 99 :257-265

[19]

CEN (European Committee for Standardization), 2005, 146512005A1 CEN

[20] Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability [J].

Chen, B ;

Liu, JY .

CEMENT AND CONCRETE RESEARCH, 2005, 35 (05) :913-917

← 1 2 3 4 5 6 →