Microstructure and strength of oxidation-bonded porous silicon nitride ceramics

被引：1
|
作者：
Ding, Shuqiang [1 ]
Zeng, Yuping [1 ]
Jiang, Dongliang [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
来源：
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4 | 2007年 / 353-358卷
关键词：
Si3N4; SiO2; porous ceramics; microstructure; strength;
D O I：
10.4028/www.scientific.net/KEM.353-358.503
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An oxidation bonding process was developed to fabricate oxidation-bonded porous silicon nitride (Si3N4) ceramics from alpha-Si3N4 powder in air at 1100-1400 degrees C. Si3N4 particles are bonded by the oxidation-derived silica (SiO2) and the pores derive from the stack of Si3N4 particles and the release of N-2 and SiO gas during the sintering. The microstructure of oxidation-bonded porous Si3N4 ceramics was observed. Moreover, the fracture mechanism was analyzed. Effects of the bonding phases and pores on the flexural strength were investigated. Oxidation-bonded porous Si3N4 ceramics with high flexural strength was obtained by restraining the crystallization of amorphous silica and forming the well-developed necks between Si3N4 particles.
引用
收藏
页码：503 / 506
页数：4
相关论文
共 50 条
  • [21] Effect of Si:C Ratio on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics
    Lim, Kwang-Young
    Kim, Young-Wook
    Woo, Sang-Kuk
    Han, In-Sub
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2008, 45 (05) : 285 - 289
  • [22] Effect of Si:C ratio on porosity and flexural strength of porous self-bonded silicon carbide ceramics
    Department of Materials Science and Engineering, University of Seoul, Seoul 130-743, Korea, Republic of
    不详
    J. Korean Ceram. Soc., 2008, 5 (285-289): : 285 - 289
  • [23] Effects of silicon particle size on microstructure and permeability of silicon-bonded SiC ceramics
    Song, In-Hyuck
    Ha, Jang-Hoon
    Park, Mi-Jung
    Kim, Hai-Doo
    Kim, Young-Wook
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2012, 120 (1405) : 370 - 374
  • [24] Influence of clay content on microstructure and flexural strength of in situ reaction bonded porous SiC ceramics
    Das, Dulal
    Kayal, Nijhuma
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 5150 - 5155
  • [25] Effect of aluminum source on flexural strength of mullite-bonded porous silicon carbide ceramics
    Kumar, B. V. Manoj
    Eom, Jung-Hye
    Kim, Young-Wook
    Han, In-Sub
    Woo, Sang-Kuk
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2010, 118 (1373) : 13 - 18
  • [26] Cold spray and presureless sintering of zirconium phosphate bonded silicon nitride ceramics with porous gradient structure
    Chen, Fei
    Li, Feiyu
    Shen, Qiang
    Zhang, Lianmeng
    12TH INTERNATIONAL SYMPOSIUM ON MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS (FGM 2012), 2013, 419
  • [27] Porous Reaction-Bonded Silicon Nitride Ceramics: Fabrication Using Hollow Polymer Microspheres and Properties
    N. K. Georgiu
    I. F. Georgiu
    K. V. Klemazov
    M. G. Lisachenko
    A. O. Zabezhailov
    M. Yu. Rusin
    Inorganic Materials, 2019, 55 : 1290 - 1296
  • [28] Gelcasting preparation of porous silicon nitride ceramics by adjusting the content of monomers
    Yu, Juanli
    Wang, Hongjie
    Zhang, Jian
    Zhang, Dahai
    Yan, Youlan
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2010, 53 (03) : 515 - 523
  • [29] Progress in Preparation and Properties of Porous Silicon Nitride Ceramics
    Zha, Hong-kai
    Yu, Wen-qing
    Li, Jing-wei
    Shi, Jian
    Li, Jun-cheng
    Tang, Wen-ming
    Lin, Yin-he
    Zhu, Kui-song
    Cheng, Ji-gui
    Liu, Gui-cheng
    SILICON, 2023, 15 (15) : 6631 - 6653
  • [30] Porous Silicon Nitride Ceramics Prepared by Extrusion Process
    Jiang Guangpeng
    Yang Jianfeng
    Gao Jiqiang
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 358 - 361
12345