Optimal control of restraint forces in an automobile impact

This study concerns a concept for on optimal control of the force developed in an automotive restraint system during a frontal impact. The concept is close to that of "smart" restraint systems and involves continuous control of the restraint force by moving the point of attachment of the restraint system to the vehicle or retracting and releasing the seat belts. The analytical foundation for the control of the restraining force does not appear to have been formulated prior to this study. The control design involves the limiting performance analysis of the isolation of an occupant from the crash impact and the formation of a feedback to sustain the open-loop control law that provides the limiting performance. Initially, the problem is outlined using a single-degree-of-freedom system and solved for optimal isolator characteristics. This exercise shows that the optimal force is constant and that the performance of a restraint system behaving as a linear spring is half as effective, as the optimal. The methodology is then applied to a published thoracic model having multiple degrees of freedom. A set of functionals is defined as constraints corresponding to injury criteria and the displacement of the occupant relative to the vehicle. The characteristics of the optimal isolator force are then determined. It is shown that this force has a short-duration period of high magnitude early in the profile, followed by an interval of nearly constant force. Next it is shown that a restraint behaving as a linear spring call generate the optimal control force fits attachment point in the vehicle is allowed to move. The design of the control law for this motion involves the determination of an optimal open-loop control and the formation of a feedback to sustain this control. Forms for both of these are presented. A substantial improvement in the behavior of all automobile occupants restraint systems can be anticipated from an active control of the seat belt retraction.