Design Analysis of High Density Polyethylene Plastic in Fisherman Ship Structure

被引：0

作者：

Jamal ^{[1
]}

Haryanto, Edy ^{[1
]}

机构：

[1] Politekn Negeri Bengkalis, Naval Architecture Dept, Riau, Indonesia

来源：

ADVANCED SCIENCE LETTERS | 2018年 / 24卷 / 12期

关键词：

Finite Element Method; Fisherman Ship; High Density Polyethylene Plastic;

D O I：

10.1166/asl.2018.13112

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

The main dimension for Malacca Strait fisherman ship made from high density polyethylene plastic for this research are already determined. The length overall (LOA) is 8 meter, breadth (B) is 1.6 meter, height (H) is 0.7 meter, net holds length is 3 meter, and stem height is 1.15 meter. This ship is designed with accordance to Det Norske Veritas (DNV). The calculation shows the value of pressure factor for side (PFs) is 38 kN/m(2) while the pressure factor for bottom (PFb) is 40 kN/m(2), and the stiffener spacing (s) is 500 mm. The thicknesses of this ship (shell bottom, shell side, and inner bottom) are 15 mm. After the construction calculation, the ship was drawing in 3D based on the previous calculation. For the final phase, the ship strength construction will be tested with Finite Element Method.

引用

页码：9678 / 9682

页数：5