Modal Dynamic Modelling and Experimental Validation of a Curved Extensible Continuum Manipulator

被引：1

作者：

Wang, Hao ^{[1
]}

Zhang, Xuping ^{[1
]}

机构：

[1] Aarhus Univ, Engn Dept, Aarhus, Denmark

来源：

2021 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA 2021) | 2021年

关键词：

ROBOT; KINEMATICS; SYSTEM; BEAM; SOFT;

D O I：

10.1109/ICRA48506.2021.9561914

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

This study presents a novel dynamic modelling method for analyzing the modal properties of a curved extensible continuum manipulator (ECM). Considering the variable bending angle and the length, the kinematic and static models are firstly established for descripting the geometric posture deformation and deflection generated by gravity. Then, the modal dynamic model is developed along the centerline direction of the ECM in the polar coordinates, by which the modal properties, include modal frequency and mode shape of curved continuum manipulator with different posture parameters are analyzed. The modal response is further analyzed based on the generalized coordinate method. Finally, the modal properties of ECM with variable posture are experimentally tested and compared with the theoretical value using the in-house developed ECM physical prototype. In the experiments, the bending, length varying and circular tracking motion are performed for the comprehensive validation of the proposed dynamics modelling method.

引用

页码：1958 / 1965

页数：8

共 31 条

[1]

Ataka A, 2016, IEEE INT CONF ROBOT, P4080, DOI 10.1109/ICRA.2016.7487598

[2]

Bauchau OA, 2009, SOLID MECH APPL, V163, P173

[3]

Bodani, 2014, NEUROSURGERY, V61, P1

[4]

Dehghani M., 2015, 2015 IEEE Eindhoven PowerTech, P1