Improved Oxidation and Hot Corrosion Resistance of 1Cr11Ni2W2MoV Stainless Steel at 650 °C by a Novel Glass-Ceramic Coating

被引：6
|
作者：
Chen, Ken [1 ]
Lin, Jiewei [1 ]
Li, Wenfang [1 ]
Zhu, Wen [1 ]
Li, Kang [1 ]
Yi, Aihua [1 ]
Hu, Shaodong [1 ]
Chen, Minghui [2 ]
Wang, Fuhui [2 ]
机构：
[1] Dongguan Univ Technol, Sch Mat Sci & Engn, 1 Daxue Rd, Dongguan 523808, Peoples R China
[2] Northeastern Univ, Shenyang Natl Lab Mat Sci, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China
来源：
CRYSTALS | 2021年 / 11卷 / 10期
基金：
中国国家自然科学基金;
关键词：
glass-ceramics coating; martensitic stainless steel; hot corrosion; oxidation; INITIAL OXIDATION; SELF-DIFFUSION; BEHAVIOR; NACL; CRYSTALLIZATION; SUPERALLOY; KINETICS; ALLOY;
D O I：
10.3390/cryst11101213
中图分类号：
O7 [晶体学];
学科分类号：
0702 ; 070205 ; 0703 ; 080501 ;
摘要：
A novel glass-ceramic coating was applied onto the 1Cr11Ni2W2MoV stainless steel. The oxidation and corrosion behaviors of coated and uncoated steels were comparatively investigated in air and in the presence of NaCl + Na2SO4 eutectic deposits at 650 & DEG;C, respectively. Protective scales formed on the surface of stainless steel prevented the severe oxidation of the alloy. Catastrophic hot corrosion occurred on the steel when a salt film was attached, producing loose iron oxide layers and internal corrosion zone. The glass-ceramic coating acted as a barrier that effectively hindered the invasion of corrosive species during the oxidation and hot corrosion tests.
引用
收藏
页数：15
相关论文
共 23 条
  • [1] Enhanced oxidation and corrosion inhibition of 1Cr11Ni2W2MoV stainless steel by nano-modified silicone-based composite coatings at 600°C
    Du, Yao
    Wang, Cheng
    Yang, Lanlan
    Zhu, Shenglong
    Wang, Fuhui
    CORROSION SCIENCE, 2020, 169
  • [2] Characterization of the forgeability of 1Cr11Ni2W2MoV steel using processing map
    Li, H.
    Li, M. Q.
    Zhang, X. Y.
    Luo, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (24-25): : 6505 - 6510
  • [3] Micromechanism of Cr, Ni and W alloying process in nitriding process of 1Cr11Ni2W2MoV stainless steel: First-principles calculation
    He, Ruijun
    Zhu, Shuo
    Han, Xiao
    Zhang, Hongye
    Guan, Shiwei
    Li, Guifa
    Peng, Ping
    SOLID STATE COMMUNICATIONS, 2023, 373
  • [4] Microstructural characteristics and erosion resistance of laser cladding Stellite 6 alloy on an 1Cr11Ni2W2MoV steel surface
    Chen, Meng
    An, Yinmin
    Wang, Quanbo
    Xu, Youwei
    Shi, Yu
    ENGINEERING FAILURE ANALYSIS, 2025, 168
  • [5] Fatigue behavior of (graded) (Ti, Al)N-coated 1Cr11Ni2W2MoV stainless steel at high temperature
    Xin, Li
    Liu, Ping
    Feng, Changjie
    Zhu, Shenglong
    Wang, Fuhui
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (15) : 2417 - 2423
  • [6] Surface Morphology Analysis of 1Cr11Ni2W2MoV Steel Subjected to Electrochemical Machining in NaNO3 Solution
    Yang, Yujun
    Zhu, Dong
    Lu, Jiawen
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2020, 167 (04)
  • [7] Diffusion bonding between nickel－base superalloy K24 and heat－resisting steel 1Cr11Ni2W2MoV
    ZHANG Jie
    ZHANG Jiuhai
    HAN Wenbo and LI Zhuoran(Measuring and Analysis Center
    China Welding, 1996, (02) : 89 - 95
  • [8] Corrosion behavior of 1Cr18Ni9Ti-1Cr11Ni2W2MoV galvanic couples in a simulated marine environment
    Zhu, Huaqiang
    Liu, Fengkun
    Long, Kailin
    AIP ADVANCES, 2022, 12 (01)
  • [9] Valorization of Coal Gangue and Vanadium-titanium Slag into Glass-ceramic Coating for Oxidation Resistance of 60Si2Mn Spring Steel at High Temperature
    Yu, Bo
    Du, Yingchao
    Wei, Lianqi
    Zhang, Xiaomeng
    Zuo, Gaohong
    Wang, Yanhua
    Ye, Shufeng
    ISIJ INTERNATIONAL, 2021, 61 (01) : 326 - 334
  • [10] Plasma sprayed Cr3C2-Ni-Cr coating for oxidation protection of 2.25Cr-1Mo steel
    Ghosh, D.
    Mitra, S. K.
    SURFACE ENGINEERING, 2015, 31 (05) : 342 - 348
123