Influence of rotor configuration on sensorless control for permanent-magnet synchronous motors

被引:10
作者
Imai, Nobuyuki
Morimoto, Shigeo [1 ]
Sanada, Masayuki [1 ]
Takeda, Yoji [2 ]
机构
[1] Osaka Prefecture Univ, Grad Sch Engn, Dept Elect & Informat Syst, Sakai, Osaka 5998531, Japan
[2] Osaka Prefectural Coll Technol, Neyagawa, Osaka 5728572, Japan
关键词
concentrated windings; finite-element method; interior permanent-magnet synchronous motors (IPMSM); magnetic saturation; sensorless control;
D O I
10.1109/TIA.2007.912733
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of rotor configuration on sensorless control for interior permanent-magnet synchronous motors (IPMSM) with concentrated windings is evaluated. Sensorless control that gives estimated angle with simple integration procedure and the biased convergent point observer is applied. Two types of rotors are analyzed and their robustness for an offset value of the observer is compared., To analyze the influence of magnetic saturation, nonlinear motor voltage equation is solved. Finite-element analysis plays an important role to realize high-speed and precise analysis. Analyzed results show that the rotor which has salient poles on the side of permanent magnets is insensitive to,the offset value of the observer. And the sensitivity to the offset value of the observer with these two types of rotors is confirmed by experimental results.
引用
收藏
页码:93 / 100
页数:8
相关论文
共 18 条
[1]   Sensorless torque control of salient-pole synchronous motor at zero-speed operation [J].
Aihara, T ;
Toba, A ;
Yanase, T ;
Mashimo, A ;
Endo, K .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 1999, 14 (01) :202-208
[2]  
BIANCHI N, P PESC 06, P18121
[3]   Influence of rotor geometry of an IPM motor on sensorless control feasibility [J].
Bianchi, Nicola ;
Bolognani, Silverio .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2007, 43 (01) :87-96
[4]  
Bianchi N, 2006, IEEE IND APPLIC SOC, P495
[5]  
BUJA GS, P IECON 90, P1013
[6]   Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speeds [J].
Corley, MJ ;
Lorenz, RD .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1998, 34 (04) :784-789
[7]   Using multiple saliencies for the estimation of flux, position, and velocity in AC machines [J].
Degner, MW ;
Lorenz, RD .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1998, 34 (05) :1097-1104
[8]   Cross-saturation effects in IPM motors and related impact on sensorless control [J].
Guglielmi, Paolo ;
Pastorelli, Michele ;
Vagati, Alfredo .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2006, 42 (06) :1516-1522
[9]  
IAMI N, 2006, IEEE T IND APPL, V42, P1193
[10]  
IAMI N, 2004, IEEJ PAP JOINT TEC M, P1