Glass and Hot Extrusion by ME Module for 3D Additive Manufacturing

被引：0

作者：

Wang, P. W. ^{[1
]}

Chou, C. S. ^{[1
]}

Wei, W. C. J. ^{[1
]}

Liu, A. ^{[2
]}

Wang, A. B. ^{[2
]}

Liu, B. H. ^{[3
]}

Luo, R. C. ^{[4
]}

机构：

[1] Natl Taiwan Univ, Dept Mat Sci Engn, Taipei, Taiwan

[2] Natl Taiwan Univ, Inst Appl Mech, Taipei, Taiwan

[3] Natl Cheng Kung Univ, Dept Mat Sci Engn, Tainan 701, Taiwan

[4] Natl Taiwan Univ, Dept Elect Engn, Taipei, Taiwan

来源：

PROCEEDINGS 2016 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT) | 2016年

关键词：

glass; melt extrusion (ME); 3DP; additive manufacturing;

D O I：

暂无

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

Due to a relatively low melting point and good formability of Na2O-SiO2-TiO2 with B2O3 (NS-TB), a glass was selected suitably applied on 3D printing (3DP) technique. As a result, a melt-extrusion (ME) module was designed and assembled to print layers of NS-TB glass directly. The ME module consisted of heating and thermal insulation devices, could reach 1100 degrees C at the nozzle by supplying 130 W power so to extrude glass filaments. Thermal insulation of the module was excellent, which was 51 degrees C outside the module while the nozzle was in operation. The extrusion of the glass and the property of capillary viscosity will be reported.

引用

页码：1167 / 1171

页数：5