Brazing SiO2f/SiO2 with TC4 alloy with the help of coating graphene

被引：16
作者：
Lin, Jinghuang [1 ]
Ba, Jin [1 ]
Cai, Yifei [1 ]
Ma, Qiang [1 ]
Luo, Dalin [1 ]
Wang, Zeyu [1 ]
Qi, Junlei [1 ]
Cao, Jian [1 ]
Feng, Jicai [1 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Heilongjiang, Peoples R China
来源：
VACUUM | 2017年 / 145卷
基金：
中国国家自然科学基金;
关键词：
Brazing; Carbon materials; Ceramic composites; Graphene; Wettability; Surface; MECHANICAL-PROPERTIES; C/C COMPOSITES; CU FOAM; INTERLAYER; MICROSTRUCTURE; AGCUTI; JOINT; FILLERS; NB;
D O I：
10.1016/j.vacuum.2017.09.010
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The joining of SiO2f/SiO2 to TC4 alloys suffers from the problems of poor wettability with AgCuTi, excessive Ti dissolving from TC4 and emergence of high residual stress among the joint. To solve these problems, an effective method by coating graphene on the SiO2f/SiO2 is developed. Wetting experiments confirm that contact angle notably reduces from 131 to 42.8 degrees after coating rGO. Further, rGO react with Ti element from the brazing alloy and TC4 alloy, inhibiting the formation of excessive brittle reaction layer and in situ forming TiC reinforcement. The highest shear strength of SiO2f/SiO2 TC4 brazed joints was up to 39.2 MPa. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：241 / 244
页数：4
相关论文
共 12 条
[1]   In situ consume excessive Ti element and form fine Ti based compounds as reinforcements for strengthening C/C-TC4 joints [J].
Ba, Jin ;
Wang, Yiheng ;
Liu, Yulin ;
Lin, Jinghuang ;
Qi, Junlei ;
Wang, Gang ;
Zhong, Zhengxiang ;
Ma, Qiang ;
Wang, Zeyu ;
Feng, Jicai .
VACUUM, 2017, 143 :303-311
[2]   Joining of SiO2f/SiO2 composite to Ti-6Al-4V using Ag-Cu-In-Ti brazing fillers, the joint strengths, and microstructures [J].
Chen Bo ;
Zou Wen-Jiang ;
Li Wen-Wen ;
Wu Shi-Biao ;
Xiong Hua-Ping .
WELDING IN THE WORLD, 2017, 61 (04) :833-837
[3]   Effects of processing parameters on microstructure and mechanical behavior of SiO2/Ti-6Al-4V joint brazed with AgCu/Ni interlayer [J].
Feng, J. C. ;
Liu, D. ;
Zhang, L. X. ;
Lin, X. C. ;
He, P. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (06) :1522-1528
[4]   New insights on the structural evolution of biomass char upon pyrolysis as revealed by the Raman spectroscopy and elemental analysis [J].
Guizani, Chamseddine ;
Haddad, Khouloud ;
Limousy, Lionel ;
Jeguirim, Mejdi .
CARBON, 2017, 119 :519-521
[5]   Control interfacial microstructure and improve mechanical properties of TC4-SiO2f/SiO2 joint by AgCuTi with Cu foam as interlayer [J].
Lin, Jing Huang ;
Luo, Da Lin ;
Chen, Shu Lin ;
Mao, De Shun ;
Wang, Ze Yu ;
Ma, Qiang ;
Qi, Jun Lei ;
Feng, Ji Cai .
CERAMICS INTERNATIONAL, 2016, 42 (15) :16619-16625
[6]   Interfacial microstructure and improved wetting mechanism of SiO2f/SiO2 brazed with Nb by plasma treatment [J].
Lin, Jinghuang ;
Ba, Jin ;
Liu, Yulin ;
Wang, Yiheng ;
Guo, Jiale ;
Luo, Dalin ;
Cai, Yifei ;
Mao, Deshun ;
Qi, Junlei ;
Feng, Jicai .
VACUUM, 2017, 143 :320-328
[7]   Regulating the surface structure of SiO2f/SiO2 composite for assisting in brazing with Nb [J].
Ma, Qiang ;
Li, Zhuo Ran ;
Chen, Shu Lin ;
Luo, Da Lin ;
Zhou, Zhi ;
Lin, Jing Huang ;
Qi, Jun Lei ;
Feng, Ji Cai .
MATERIALS LETTERS, 2016, 182 :159-162
[8]   Microstructure and mechanical properties of Al2O3/TiAl joints brazed with B powders reinforced Ag-Cu-Ti based composite fillers [J].
Niu, G. B. ;
Wang, D. P. ;
Yang, Z. W. ;
Wang, Y. .
CERAMICS INTERNATIONAL, 2017, 43 (01) :439-450
[9]   Vacuum brazing of the Gr/2024Al composite and TC4 alloy using AgCuTi filler alloy with Ni-Al interlayer as auxiliary heat source [J].
Shi, J. M. ;
Feng, J. C. ;
Liu, H. ;
Tian, X. Y. ;
Zhang, L. X. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 694 :672-681
[10]   Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy [J].
Song, Xin-rui ;
Li, He-jun ;
Zeng, Xierong ;
Zhang, Leilei .
MATERIALS LETTERS, 2016, 183 :232-235
12