Thermophysical properties of anhydride-cured epoxy/nano-clay composites

被引：30

作者：

Miyagawa, H ^{[1
]}

Rich, MJ ^{[1
]}

Drzal, LT ^{[1
]}

机构：

[1] Michigan State Univ, Ctr Composite Mat & Struct, E Lansing, MI 48824 USA

来源：

POLYMER COMPOSITES | 2005年 / 26卷 / 01期

关键词：

D O I：

10.1002/pc.20071

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Polymer nano-composites made with a matrix of anhydride-cured diglycidyl ether of bisphenol A (DGEBA) and reinforced with organo-montmorillonite clay were investigated. A sonication technique was used to process the epoxy/clay nano-composites. The thermal properties of the nano-composites were measured with dynamic mechanical analysis (DMA). The glass transition temperature T, of the anhydride-cured epoxy was higher than the room temperature (RT). For samples with 6.25 wt% (4.0 vol%) of clay, the storage modulus at 30degreesC and at (T-g, + 15)degreesC was observed to increase 43% and 230%, respectively, relative to the value of unfilled epoxy. The clay reinforcing effect was evaluated using the Tandon-Weng model for randomly oriented particulate filled composites. Transmission electron microscopy (TEM) examination of the nano-composites prepared by sonication of clays in acetone showed well-dispersed platelets in the nano-composites. The clay nano-platelets were observed to be well-intercalated/expanded in the anhydride-cured epoxy resin system. POLYM. COMPOS., 26:42-51, 2005. (C) 2004 Society of Plastics Engineers

引用

页码：42 / 51

页数：10

共 24 条

[1]

ABOUDI EGJ, 1991, MECH COMPOSITE MAT

[2] Thermoset-layered silicate nanocomposites. quaternary ammonium montmorillonite with primary diamine cured epoxies [J].

Brown, JM ;

Curliss, D ;

Vaia, RA .

CHEMISTRY OF MATERIALS, 2000, 12 (11) :3376-3384

[3] Micromechanics of nanocomposites: comparison of tensile and compressive elastic moduli, and prediction of effects of incomplete exfoliation and imperfect alignment on modulus [J].

Brune, DA ;

Bicerano, J .

POLYMER, 2002, 43 (02) :369-387

[4] Representative volume element size for elastic composites: A numerical study [J].

Gusev, AA .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1997, 45 (09) :1449-1459

[5] Numerical identification of the potential of whisker- and platelet-filled polymers [J].

Gusev, AA .

MACROMOLECULES, 2001, 34 (09) :3081-3093

[6]

KATZ HS, 1987, HDB FILLERS PLASTICS, P56

[7] MECHANICAL-PROPERTIES OF NYLON 6-CLAY HYBRID [J].

KOJIMA, Y ;

USUKI, A ;

KAWASUMI, M ;

OKADA, A ;

FUKUSHIMA, Y ;

KURAUCHI, T ;

KAMIGAITO, O .

JOURNAL OF MATERIALS RESEARCH, 1993, 8 (05) :1185-1189

[8]

LAN T, 1995, CHEM MATER, V7, P2144, DOI 10.1021/cm00059a023

[9] CLAY-REINFORCED EPOXY NANOCOMPOSITES [J].

LAN, T ;

PINNAVAIA, TJ .

CHEMISTRY OF MATERIALS, 1994, 6 (12) :2216-2219

[10] Polymer-layered silicate nanocomposites: an overview [J].

LeBaron, PC ;

Wang, Z ;

Pinnavaia, TJ .

APPLIED CLAY SCIENCE, 1999, 15 (1-2) :11-29

← 1 2 3 →