Indoor environment quality in buildings and its impact on outdoor environment

被引:27
作者
Roulet, CA [1 ]
机构
[1] Swiss Fed Inst Technol, Solar Energy & Bldg Phys Res Lab, CH-1015 Lausanne, Switzerland
关键词
buildings; energy; environment; comfort;
D O I
10.1016/S0378-7788(00)00080-3
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The main purpose of buildings is to provide a comfortable living environment for their occupants. This includes, among others, thermal, visual and acoustic comfort as well as indoor air quality Except during the 1950's and 1960's, it has always been considered important that an excess use of energy should be avoided in the construction and the management of a building, sometimes even at the cost of user comfort. Energy saving is, however, not the main purpose of the building. Indeed, if it were really so, the largest energy savings would be obtained by not erecting the building in the first place. Since the Rio conference, there have been more and more incentives to save energy and lower the impact of buildings on the environment. Therefore, there is no excuse for the building sector not to adopt a sustainable development policy. Some energy is required to control the indoor climate and indoor air quality. Therefore, it is often suspected that energy savings result in poorer indoor environment quality, or, on the contrary, that a high comfort level is the result of high technology and high energy consumption. This is not true. It is now generally admitted among building scientists that high quality energy services do not necessarily incur a high energy use, and that good environment quality can be obtained with a reasonable amount of energy and power, and with a low environmental impact. The presentation brings some evidence from past and current research to support this assertion. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:183 / 191
页数:9
相关论文
共 17 条
  • [1] ALVAREZ S, 1995, NATURAL COOLING TECH
  • [2] BAUER M, 1998, NEUR REGL KLIM INFR
  • [3] BLUYSSEN PM, 1995, HLTH BUILD 96 C MIL
  • [4] BOURDEAU L, 1993, DEV SIMPLIFIED DESIG, P15177
  • [5] BURTON S, 1999, OFFICE DESIGNERS HDB
  • [6] Chatelet A., 1998, ARCHITECTURE CLIMATI
  • [7] COURRET G, 1996, LIGHTING RES TECHNOL, V28
  • [8] CRAMERI R, 1992, RADONPROGRAM SCHWEIZ
  • [9] De Dear R., 1998, Developing an Adaptive Model of Thermal Comfort and Preference, V104, DOI DOI 10.1007/S10669-007-9018-7
  • [10] FLANNIGAN B, TFI1996 ISIAQ