On the Stacking Fault Energy of Fe-18 Pct Mn-0.6 Pct C-1.5 Pct Al Twinning-Induced Plasticity Steel

被引:40
作者
Kim, Jinkyung [1 ]
De Cooman, B. C. [1 ]
机构
[1] Pohang Univ Sci & Technol, Grad Inst Ferrous Technol, Mat Design Lab, Pohang, South Korea
来源
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2011年 / 42A卷 / 04期
关键词
HADFIELD MANGANESE STEEL; INTERNAL-FRICTION; C ALLOYS; MECHANICAL-PROPERTIES; MN; STRAIN; DEFORMATION; AUSTENITE; CARBON; RELAXATION;
D O I
10.1007/s11661-011-0610-6
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The stacking fault energy (SFE) of Fe-18 pct Mn-0.6 pct C-1.5 pct Al twinning-induced plasticity (TWIP) steel was measured using weak-beam dark-field imaging of dissociated dislocations observed in transmission electron microscopy. The SFE was found to be 30 mJ/m(2). A relatively wide scatter was observed in the experimentally measured partial dislocation separation of screw dislocations. It is argued that the anomalously wide partial dislocation separation is due to the interaction of point-defect pairs involving interstitial C atoms with the strain field of the partial dislocations. Internal friction (IF) experiments were carried out to detect the presence of point-defect pairs that might affect the dislocation separation, and a clear Finkelshtein-Rosin (FR) peak related to point-defect pairs involving interstitial C atoms was observed in the IF spectrum.
引用
收藏
页码:932 / 936
页数:5
相关论文
共 30 条
[1]   Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys [J].
Allain, S ;
Chateau, JP ;
Bouaziz, O ;
Migot, S ;
Guelton, N .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 :158-162
[2]  
Allain S., 2004, MAT SCI ENG A-STRUCT, VA387-389, P306
[3]   REVIEW OF INTERNAL FRICTION DUE TO POINT DEFECTS [J].
BERRY, BS .
ACTA METALLURGICA, 1962, 10 (APR) :271-&
[4]   Formation of substitutional-interstitial clusters in dilute alloys: Development of previous models [J].
Biscarini, A ;
Campanella, R ;
Coluzzi, B ;
Mazzolai, FM .
JOURNAL DE PHYSIQUE IV, 1996, 6 (C8) :51-54
[5]  
Blanter MS, 2007, SPRINGER SER MATER S, V90, pVII, DOI 10.1007/978-3-540-68758-0
[6]  
Blanter MS, 2000, PHYS STATUS SOLIDI A, V178, P621, DOI 10.1002/1521-396X(200004)178:2<621::AID-PSSA621>3.0.CO
[7]  
2-#
[8]   On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels [J].
Byun, TS .
ACTA MATERIALIA, 2003, 51 (11) :3063-3071
[9]   MECHANISM OF WORK-HARDENING IN HADFIELD MANGANESE STEEL [J].
DASTUR, YN ;
LESLIE, WC .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (05) :749-759
[10]   Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel [J].
Dumay, A. ;
Chateau, J. -P. ;
Allain, S. ;
Migot, S. ;
Bouaziz, O. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 :184-187