Mechanical and tribological performance of Ni-Co-based binders for cubic boron nitride cutting tools

被引：1

作者：

Miranda, G. ^{[1
]}

Guimaraes, B. ^{[1
]}

Pereira, D. ^{[1
]}

Buciumeanu, M. ^{[2
]}

Cabral, A. ^{[3
]}

Fredel, M. ^{[3
]}

Silva, F. S. ^{[1
]}

Henriques, B. ^{[1
,2
]}

机构：

[1] Univ Minho, Ctr Microelectro Mech Syst CMEMS, Campus Azurem, P-4800058 Guimaraes, Portugal

[2] Univ Galatzi, Cross Border Fac Humanities Econ & Engn, Galati, Romania

[3] Fed Univ Santa Catarina UFSC, Ceram & Composite Mat Res Grp CERMAT, Florianopolis, SC, Brazil

来源：

JOURNAL OF COMPOSITE MATERIALS | 2020年 / 54卷 / 20期

关键词：

Cutting tools; Ni-Co-based materials; hot pressing; wear; mechanical properties; CBN; MICROSTRUCTURE; WEAR; COMPOSITES;

D O I：

10.1177/0021998320902514

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Cubic boron nitride is becoming an alternative cutting tool material for machining under demanding conditions, displaying superior wear performance and machined parts with higher quality. The current need to reduce the cobalt content in these tools led to this study and focused on alternative binder materials for cubic boron nitride cutting tools. This work addresses several nickel-cobalt-based materials, regarding their microstructure, mechanical (hardness and shear strength), and tribological performance. The best results were attained when adding tungsten carbide to nickel-cobalt, once nickel-cobalt-tungsten carbide was found to display the higher mechanical properties, together with the higher wear resistance.

引用

页码：2753 / 2760

页数：8

共 28 条

[1] CONTACT AND RUBBING OF FLAT SURFACES
ARCHARD, JF
[J]. JOURNAL OF APPLIED PHYSICS, 1953, 24 (08) : 981 - 988
[2] Blossom JW, MINERALS YB METALS M, V1, P1
[3] Bushlya V, 2020, INT J REFRACT MET H, V86, DOI [10.1016/j.ijrmlim.2019.105100, 10.1016/j.ijrmhm.2019.105100]
[4] Carbon nanotube dispersion in aluminummatrix composites-Quantification and influence on strength
Carvalho, O.
Miranda, G.
Soares, D.
Silva, F. S.
[J]. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2016, 23 (01) : 66 - 73
[5] Magnetic and hardness properties of nanostructured Ni-Co films deposited by a nonaqueous electroless method
Chow, GM
Ding, J
Zhang, J
Lee, KY
Surani, D
Lawrence, SH
[J]. APPLIED PHYSICS LETTERS, 1999, 74 (13) : 1889 - 1891
[6] Nickel-cobalt-based materials for diamond cutting tools
Costa, M. M.
Flores, P.
Pereira, D.
Buciumeanu, M.
Cabral, A.
Fredel, M.
Silva, F. S.
Henriques, B.
Miranda, G.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (1-4) : 1059 - 1067
[7] Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents
Ding, W. F.
Xu, J. H.
Chen, Z. Z.
Yang, C. Y.
Song, C. J.
Fu, Y. C.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (5-8) : 1309 - 1315
[8] 3RD-BODIES IN TRIBOLOGY
GODET, M
[J]. WEAR, 1990, 136 (01) : 29 - 45
[9] Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon
Goel, Saurav
Luo, Xichun
Reuben, Robert L.
Bin Rashid, Waleed
[J]. MATERIALS LETTERS, 2012, 68 : 507 - 509
[10] Copper-nickel-based diamond cutting tools: stone cutting evaluation
Henriques, B.
Ferreira, P.
Buciumeanu, M.
Fredel, M.
Cabral, A.
Silva, F. S.
Miranda, G.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (1-4) : 1339 - 1348

← 1 2 3 →