The effect of Ti and TiN barrier layers on the stress and adhesion of Cu thin films deposited on Si

被引：0
|
作者：
Beegan, D [1 ]
Laugier, MT [1 ]
Arshak, A [1 ]
机构：
[1] Univ Limerick, Dept Phys, Limerick, Ireland
来源：
SURFACE TREATMENT V: COMPUTER METHODS AND EXPERIMENTAL MEASUREMENTS | 2001年 / 6卷
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effect of Ti and TiN barrier layers on the mechanical and electrical properties of RF magnetron sputtered Cu thin films is investigated. The relationship between the mechanical properties of film stress and adhesion is investigated in the two-layer film structure by indentation techniques. Changes in the length of indentation cracks are attributed to stresses in the films. Adhesion is determined from the scratch test. The resistivity of the films was measured by four-point probe and the films were characterised by AFM and XRD.
引用
收藏
页码：43 / 53
页数：11
相关论文
共 50 条
  • [1] Formation of Ti diffusion barrier layers in Thin Cu(Ti) alloy films
    S. Tsukimoto
    T. Morita
    M. Moriyama
    Kazuhiro Ito
    Masanori Murakami
    Journal of Electronic Materials, 2005, 34 : 592 - 599
  • [2] Formation of ti diffusion barrier layers in thin Cu(Ti) alloy films
    Tsukimoto, S
    Morita, T
    Moriyama, M
    Ito, K
    Murakami, M
    JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (05) : 592 - 599
  • [3] Effect of Ti interlayer on the residual stress and texture development of TiN thin films deposited by unbalanced magnetron sputtering
    Huang, Jia-Hong
    Ma, Cheng-Hsin
    Chen, Haydn
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06): : 3199 - 3204
  • [4] Residual Stress of Pt Films with Ti and TiOx Adhesion Layers on Si and Sapphire Substrates
    Ivill, M.
    Cole, M. W.
    Hirsch, S. G.
    Hubbard, C.
    INTEGRATED FERROELECTRICS, 2009, 111 : 37 - 49
  • [5] Ti, TiN, and Ti/TiN thin films prepared by ion beam assisted deposition as diffusion barriers between Cu and Si
    Mu, HC
    Yu, YH
    Luo, EZ
    Sundaravel, B
    Wong, SP
    Wilson, IH
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 2000, 18 (05): : 2312 - 2318
  • [6] Experimental and numerical evaluations of adhesion strength and stress in TiN films deposited on ti-implanted aluminum
    Xu, M
    Liu, YM
    Li, LH
    Cai, X
    Chen, QL
    Chu, PK
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2006, 24 (02): : 212 - 217
  • [7] Effect of Ti interlayer on the residual stress and texture development of TiN thin films
    Huang, JH
    Ma, CH
    Chen, H
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (20-21): : 5937 - 5945
  • [8] Microstructure, stress and texture in sputter deposited TiN thin films: effect of substrate bias
    Chakraborty, J.
    Maity, Tias
    Kumar, Kishor
    Mukherjee, S.
    RESIDUAL STRESSES IX, 2014, 996 : 855 - +
  • [9] Stress-temperature behavior and stress relaxation in Ti/Al-0.5%Cu/TiN and TiN/W thin films
    Doucet, L
    Brun, A
    Jaouen, H
    Dupeux, M
    Ignat, M
    POLYCRYSTALLINE THIN FILMS: STRUCTURE, TEXTURE, PROPERTIES, AND APPLICATIONS II, 1996, 403 : 657 - 662
  • [10] Diffusion barrier property of TiN and TiN/Al/TiN with FMCVD for Cu interconnection in films deposited ULSI
    Shin, YH
    Shimogaki, Y
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2004, 5 (04) : 399 - 405
12345