Strain rate effect on bond stress-slip relationship between basalt fiber-reinforced polymer sheet and concrete

被引:51
作者
Shen, Dejian [1 ,2 ]
Shi, Xiang [1 ]
Ji, Yong [1 ]
Yin, Fenfang [1 ]
机构
[1] Hohai Univ, Coll Civil & Transportat Engn, Nanjing 210098, Jiangsu, Peoples R China
[2] Tongji Univ, State Key Lab Disaster Reduct Civil Engn, Shanghai 200092, Peoples R China
基金
中国国家自然科学基金;
关键词
Dynamic tests; basalt fiber-reinforced polymer; bond stress; slip; strain rate; ultimate load; STRENGTH MODEL; FRP; BEHAVIOR; COMPOSITES; LENGTH;
D O I
10.1177/0731684415574539
中图分类号
TB33 [复合材料];
学科分类号
摘要
Reinforced concrete structures that are strengthened with fiber-reinforced polymers frequently suffer dynamic loadings. The success of this strengthening method depends on the effectiveness of the bond between the fiber-reinforced polymer sheet and concrete. Determining the bond behavior between the fiber-reinforced polymer and concrete substrate is an important issue in technology because the typical failure mode of fiber-reinforced polymer-to-concrete joints is debonding of the composite from the concrete substrate. Although numerous experimental studies have investigated this static bond behavior, experimental data concerning dynamic tests on maximum bond stress, ultimate load, and the bond-slip relationship of the interface between basalt fiber-reinforced polymer sheets and concrete under different strain rates are lacking. This study presents an experimental investigation of the dynamic performance between the basalt fiber-reinforced polymer sheet and concrete under different strain rates. Double-lap shear specimens were used in the tests. The dynamic test results are reported and discussed in this paper to evaluate and compare the influence of the strain rate on the dynamic maximum bond stress, ultimate load, as well as the bond-slip relationship between the basalt fiber-reinforced polymer sheets and concrete. The data show that the maximum bond stress, ultimate load, and bond-slip relationship are sensitive to the strain rate. The test results indicate that (1) the dynamic maximum bond stress of the basalt fiber-reinforced polymer-concrete interface increases with the increase of the strain rate; (2) the dynamic ultimate load of the basalt fiber-reinforced polymer-concrete interface increases with the increasing strain rate as a logarithmic function; and (3) the strain rate has no effect on the slip at the maximum bond stress, and the dynamic bond-slip relationships of basalt fiber-reinforced polymer-concrete interface under different strain rates are similar. The calculation models of the dynamic maximum bond stress, ultimate load, and bond-slip relationship were established through a regression analysis of the dynamic test data while considering the influence of the strain rate.
引用
收藏
页码:547 / 563
页数:17
相关论文
共 50 条
[41]  
[施嘉伟 Shi Jiawei], 2012, [土木工程学报, China Civil Engineering Journal], V45, P99
[42]   Characteristics of basalt fiber as a strengthening material for concrete structures [J].
Sim, J ;
Park, C ;
Moon, DY .
COMPOSITES PART B-ENGINEERING, 2005, 36 (6-7) :504-512
[43]  
Tanaka T., 1996, Shear-Resisting Mechanism of Reinforced Concrete Beams with CFS as Shear Reinforcement
[44]  
Tomlinson D., J Compos Constr
[45]   Experimental Investigation on FRP-to-Timber Bonded Interfaces [J].
Wan, Jing ;
Smith, Scott T. ;
Qiao, Pizhong ;
Chen, Fangliang .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2014, 18 (03)
[46]  
Wang Z, 1997, COMPOS SCI TECHNOL, V57, P1599, DOI 10.1016/S0266-3538(97)00092-4
[47]   Unified Strength Model Based on Hoek-Brown Failure Criterion for Circular and Square Concrete Columns Confined by FRP [J].
Wu, Yu-Fei ;
Zhou, Ying-Wu .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2010, 14 (02) :175-184
[48]   A Three-Parameter Bond Strength Model for FRP-Concrete Interface [J].
Wu, Zhishen ;
Islam, S. M. ;
Said, Hemdan .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (19) :2309-2323
[49]  
Yang YX, 2001, J BUILD STRUCT, V22, P36
[50]  
Yin FF, 2014, THESIS HOHAI U