Impact toughness in Al-12Si and Al-12Si-3Cu cast alloys - Part 1: Effect of process variables and microstructure

被引：28

作者：

Basavakumar, K. G. ^{[1
]}

Mukunda, P. G. ^{[1
]}

Chakraborty, M. ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India

来源：

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2008年 / 35卷 / 04期

关键词：

impact toughness; grain refinement : modification; eutectic Al-Si cast alloys;

D O I：

10.1016/j.ijimpeng.2007.03.002

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The charpy impact energy of Al-12Si and Al-12Si-3Cu cast alloys was measured in terms of the total absorbed energy. The standard charpy specimens 10 x 10 x 55 turn with a 2 turn V-notch were prepared from the castings. Effect of process variables and microstructural changes on the impact toughness of Al-12Si and Al-12Si-3Cu cast alloys was investigated. The results indicate that combined grain refined and modified Al-12Si-3Cu cast alloys have microstructures consisting of uniformly distributed alpha-Al dendrites, eutectic Al-Si and fine CuAl2 particles in the interdendritic region. These alloys exhibited better impact toughness in the cast condition compared with the same alloy subjected to only grain refinement or modification. (C) 2007 Elsevier Ltd. All rights reserved.

引用

页码：199 / 205

页数：7

共 20 条

[1] Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP [J].

Akamatsu, H ;

Fujinami, T ;

Horita, Z ;

Langdon, TG .

SCRIPTA MATERIALIA, 2001, 44 (05) :759-764

[2]

*ASM INT, 1989, ASM HDB, P785

[3]

ASTM, 2000, ASTM E647

[4]

BASAVAKUMAR KG, 2006, T INDIAN I METALS, V59, P400

[5] DAMAGE INITIATION IN METAL MATRIX COMPOSITES [J].

BRECHET, Y ;

EMBURY, JD ;

TAO, S ;

LUO, L .

ACTA METALLURGICA ET MATERIALIA, 1991, 39 (08) :1781-1786

[6]

Green N.R., 1994, AFS T, P341

[7] A STUDY ON THE MICROSTRUCTURE-FRACTURE BEHAVIOR RELATIONS IN AL-SI CASTING ALLOYS [J].

HAFIZ, MF ;

KOBAYASHI, T .

SCRIPTA METALLURGICA ET MATERIALIA, 1994, 30 (04) :475-480

[8]

HELLAWELL A, 1973, PROGR MAT SCI, V15

[9] Principle of equal-channel angular pressing for the processing of ultra-fine grained materials [J].

Iwahashi, Y ;

Wang, JT ;

Horita, Z ;

Nemoto, M ;

Langdon, TG .

SCRIPTA MATERIALIA, 1996, 35 (02) :143-146

[10] Development of an efficient grain refiner for Al-7Si alloy and its modification with strontium [J].

Kori, SA ;

Murty, BS ;

Chakraborty, M .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 283 (1-2) :94-104

← 1 2 →