RETRACTED: Evaluation of specific properties of glass and carbon/vinyl ester composites (Retracted article. See vol.39, pg. 1287, 2008)

被引：3

作者：

Swaminathan, Gowthaman ^{[1
]}

Shivakumar, Kunigal N. ^{[1
]}

Sharpe, Mathew ^{[1
]}

机构：

[1] N Carolina Agr & Tech State Univ, Ctr Composite Mat Res, Greensboro, NC 27411 USA

来源：

COMPOSITES PART B-ENGINEERING | 2008年 / 39卷 / 01期

关键词：

carbon fibre; glass fibres; mechanical properties; stitch bonded fabric;

D O I：

10.1016/j.compositesb.2007.02.012

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper describes the processing and mechanical characterization of two different fibers (glass and carbon) and two different fabric architectures (woven roving and stitch bonded) made into composites with Dow Chemical's Derakane 510A-40, a brominated vinyl ester resin. Both E-glass and T700 carbon fibers were coated with vinyl ester compatible sizing. Composite panels were fabricated by vacuum assisted resin transfer molding (VARTM), specimens were machined, and mechanical tests were conducted as per the accepted test standards. Tension, compression, in-plane shear and inter-laminar shear properties were measured and their associated failure modes were compared with each other. The specific properties of the composites were compared with that of steel. (C) 2007 Published by Elsevier Ltd.

引用

页码：27 / 35

页数：9

共 20 条

[1]

Abali F, 2003, J COMPOS MATER, V37, P453, DOI [10.1177/0021998303037005053, 10.1106/002199803031053]

[2]

*AMT AS, 650C12 LT AMT AS

[3]

[Anonymous], P IUTAM S IN DEF COM

[4]

*ASTM INT, 2002, ANN BOOK ASTM STAND, P126

[5]

BUDIANSKY B, 1983, MICROMECHANICS COMPU, V16

[6]

CHALLA P, 2001, 42 AIAA ASME ASCE AH

[7]

CHANDRA S, 2004, CMES COMPUTER MAT EN, V6, P1

[8]

*COPC MAX 3 CNC, 2004, EX NONCR REINF COMP

[9]

COX B, 1995, 4686 NASA

[10]

DOW MB, 1997, NASATP97206234

← 1 2 →