An optimal hybrid adaptive controller based on the multi-objective evolutionary algorithm for an under-actuated nonlinear ball and wheel system

被引:6
作者
Pezhman, Alireza [1 ]
Rezapour, Javad [1 ]
Mahmoodabadi, Mohammad Javad [2 ]
机构
[1] Islamic Azad Univ, Dept Mech Engn, Lahijan Branch, Lahijan, Iran
[2] Sirjan Univ Technol, Dept Mech Engn, Sirjan, Iran
关键词
Sliding mode controller; Feedback linearization; PD controller; Multi-objective evolutionary algorithms; Gradient descent method; Ball and wheel system; SLIDING MODE CONTROL; FEEDBACK-LINEARIZATION; OPTIMIZATION; DESIGN;
D O I
10.1007/s12206-020-0334-x
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The present paper introduces an optimal hybrid adaptive robust sliding mode control based on a combination of feedback linearization and a PD controller (ARSMC-PD) to present a general scheme for stabilization of a ball and wheel system. Since the combination of adaptive sliding mode and feedback linearization cannot reduce the control efforts and tracking error, a PD controller is added to enhance the performance and provide sufficient optimal control input. At first, an adaptive mechanism is used to update the parameters of the SMC controller according to the gradient descent method and the chain rule of differentiation to minimize the sliding surface. Then, the strength Pareto evolutionary algorithm (SPEA-II) is utilized to minimize the control effort and the integral time absolute errors of the system response simultaneously in the presence of disturbance. The results prove the efficiency of the proposed controller in two aspects of low tracking error and optimal control input.
引用
收藏
页码:1723 / 1734
页数:12
相关论文
共 28 条
  • [11] Adaptive approximate input-output linearizing control with applications to ball and beam mechanism
    Kara, Tolgay
    Eker, Ilyas
    [J]. TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 2018, 40 (04) : 1201 - 1211
  • [12] Estimation of load torque in induction motors via dynamic sliding mode control and new nonlinear state observer
    Karami-Mollaee, Ali
    Tirandaz, Hamed
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (05) : 2283 - 2288
  • [13] Khalil H. K., 2002, NONLINEAR SYSTEMS, V3rd
  • [14] Aerodynamic design and optimization of a high-loaded axial fan stage using a curvature control method
    Li, Jieling
    Chen, Huanlong
    Liu, Yang
    Wang, Junli
    Yang, Xianqing
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (08) : 3871 - 3883
  • [15] Liu SY, 2011, PROCEEDINGS OF THE FIFTH INTERNATIONAL SYMPOSIUM - THE DEVELOPMENT OF SMALL AND MEDIUM-SIZED ENTERPRISES, P133
  • [16] Adaptive fuzzy sliding mode control for electric power steering system
    Lu, Sheng
    Lian, Majun
    Liu, Mingjie
    Cho, Chongdu
    Piao, Changhao
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (06) : 2643 - 2650
  • [17] Swing-Up and Stabilization Control of Inverted-Pendulum Systems via Coupled Sliding-Mode Control Method
    Park, Mun-Soo
    Chwa, Dongkyoung
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2009, 56 (09) : 3541 - 3555
  • [18] Slotine J. J. E., 1991, Applied Nonlinear Control
  • [19] A particle swarm optimization approach for fuzzy sliding mode control for tracking the robot manipulator
    Soltanpour, Mohammad Reza
    Khooban, Mohammad Hassan
    [J]. NONLINEAR DYNAMICS, 2013, 74 (1-2) : 467 - 478
  • [20] van Rozendahl G., 2007, Closing or widening the gap, P1