Engineering of magnetically separable ZnFe2O4@ TiO2 nanofibers for dye-sensitized solar cells and removal of pollutant from water

In this study, magnetic Zinc Ferrite (ZnFe2O4)@ TiO2 nanofibers were prepared by low cost and nontoxic route; hydrothermal technique followed by electrospinning process. The prepared magnetic ZnFe2O4@ TiO2 nanofibers were morphologically and structurally analyzed by X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), and thermal gravimetric analysis (TGA). The prepared magnetic ZnFe2O4@ TiO2 nanofibers were utilized as photoanode for the fabrication of dye-sensitized solar cells (DSSCs) and presented applicable performance with 4.2% overall conversion efficiency with high short circuit current density (JSC) of 10.16 mA/cm(2). The maximum similar to 42% incident photo-to-current conversion efficiency (IPCE) value was also recorded at 530 nm. In addition, ZnFe2O4@ TiO2 nanofibers were not only possessed the good conversion efficiency, but also shown excellent photocatalytic efficiency with magnetic properties towards the dye remediation. Prepared ZnFe2O4@ TiO2 nanofibers can be considered as a promising material for energy conversion and environmental applications. (C) 2017 Elsevier B.V. All rights reserved.