Enhancement of power generation with concomitant removal of toluene from artificial groundwater using a mini microbial fuel cell with a packed-composite anode

被引:18
作者
Lin, Chi-Wen [1 ,2 ]
Chen, Jianmeng [3 ]
Zhao, Jingkai [3 ]
Liu, Shu-Hui [1 ]
Lin, Li-Chen [1 ]
机构
[1] Natl Yunlin Univ Sci & Technol, Dept Safety Hlth & Environm Engn, 123 Univ Rd,Sec 3, Touliu 64002, Yunlin, Taiwan
[2] Natl Yunlin Univ Sci & Technol, Touliu, Yunlin, Taiwan
[3] Zhejiang Univ Technol, Coll Environm, Hangzhou 310014, Peoples R China
关键词
Packed anode; Microbial fuel cell; Composite beads; Toluene; Groundwater water; WASTE-WATER TREATMENT; GASEOUS ETHYL-ACETATE; ELECTRICITY-GENERATION; PERFORMANCE; CIRCUIT; MEMBRANE;
D O I
10.1016/j.jhazmat.2019.121717
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Composite beads are packed in the anode chamber of a microbial fuel cell (MFC), providing more area for microbial attachment and growth, increasing the efficiency of removal of toluene from toluene-contaminated groundwater. The composite beads were fabricated by integrating carbon coke (CC) with a relatively large specific surface area to which microorganisms easily adhere with conductive carbon black (CCB), which has low electrical resistance. Since the advantages of both are complementary, the power generation of MFC is improved. The single layer-packed anode MFC (SP-MFC) completely degraded 200 mg L-1 of toluene - 2.3 times faster than the non-packed anode MFC (NP-MFC). The high power density (44.9 mW m(-3)) and oxidation peak (1 mA), with low internal resistance (207 Omega) revealed that SP effectively improved the power generation efficiency. A composition ratio (CRCCB:CC) of composite beads of one to two yielded the best performance with a removal efficiency of 100 % - 76 % faster than CC. The closed circuit voltage of CR1:2 MFC reached 340 mV, which was 16 times that of CC; the power density and oxidation peak reached 103 mW m(-3) and 1.38 mA, respectively. Therefore, CR1:2 effectively increased the overall removal efficiency and power generation of the MFC.
引用
收藏
页数:8
相关论文
共 36 条
  • [1] Conductive carbon black/magnetite hybrid fillers in microwave absorbing composites based on natural rubber
    Al-Ghamdi, Ahmed A.
    Al-Hartomy, Omar A.
    Al-Solamy, Falleh R.
    Dishovsky, Nikolay
    Malinova, Petrunka
    Atanasova, Gabriela
    Atanasov, Nikolay
    [J]. COMPOSITES PART B-ENGINEERING, 2016, 96 : 231 - 241
  • [2] Enhanced performance of microbial fuel cells by electrospinning carbon nanofibers hybrid carbon nanotubes composite anode
    Cai, Teng
    Huang, Manhong
    Huang, Yuxuan
    Zheng, Wei
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (05) : 3088 - 3098
  • [3] Controlled sequential biocathodic denitrification for contaminated groundwater bioremediation
    Cecconet, Daniele
    Bolognesi, Silvia
    Callegari, Arianna
    Capodaglio, Andrea G.
    [J]. SCIENCE OF THE TOTAL ENVIRONMENT, 2019, 651 : 3107 - 3116
  • [4] MFC-based biosensor for domestic wastewater COD assessment in constructed wetlands
    Corbella, C.
    Hartl, M.
    Fernandez-Gatell, M.
    Puigagut, J.
    [J]. SCIENCE OF THE TOTAL ENVIRONMENT, 2019, 660 : 218 - 226
  • [5] Recent advancements in real-world microbial fuel cell applications
    Gajda, Iwona
    Greenman, John
    Ieropoulos, Ioannis A.
    [J]. CURRENT OPINION IN ELECTROCHEMISTRY, 2018, 11 : 78 - 83
  • [6] Coupled LMDI and system dynamics model for estimating urban CO2 emission mitigation potential in Shanghai, China
    Gu, Shuai
    Fu, Bitian
    Thriveni, Thenepalli
    Fujita, Toyohisa
    Ahn, Ji Whan
    [J]. JOURNAL OF CLEANER PRODUCTION, 2019, 240
  • [7] Anode macrostructures influence electricity generation in microbial fuel cells for wastewater treatment
    Ishii, Yoshikazu
    Miyahara, Morio
    Watanabe, Kazuya
    [J]. JOURNAL OF BIOSCIENCE AND BIOENGINEERING, 2017, 123 (01) : 91 - 95
  • [8] Prediction of sustainable electricity generation in microbial fuel cell by neural network: Effect of anode angle with respect to flow direction
    Jaeel, Ali J.
    Al-wared, Abeer I.
    Ismail, Zainab Z.
    [J]. JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2016, 767 : 56 - 62
  • [9] Application of 3D printed ABS based conductive carbon black composite sensor in void fraction measurement
    Jayanth, N.
    Senthil, P.
    [J]. COMPOSITES PART B-ENGINEERING, 2019, 159 : 224 - 230
  • [10] Kalathil S., 2018, ENCY INTERFACIAL CHE, P309