Improving the strength of Al2TiO5 by adding spodumene

被引：1

作者：

Pan, JY ^{[1
]}

Gong, JH ^{[1
]}

机构：

[1] Tsing Hua Univ, Dept Mat Sci & Engn, Beijing 100084, Peoples R China

来源：

HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2 | 2005年 / 280-283卷

关键词：

aluminium titanate; mineral; bending strength;

D O I：

10.4028/www.scientific.net/KEM.280-283.1185

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Aluminium titanate (Al2TiO5) is an excellent oxide ceramic material with a very low thermal expand coefficient. Aiming at improving the bending strength Al2TiO5, spodumene was used as additives for preparing Al2TiO5 and the effect of adding spodumene on the mechanical properties of Al2TiO5 was investigated in this paper. It was found that adding spodumene, instead of simple oxides, may significantly enhance the bending strength of Al2TiO5.

引用

页码：1185 / 1186

页数：2

共 50 条

[1] Dilatometric based analysis of the synthesis of Al2TiO5
Huang, YX
Senos, AMR
Baptista, JL
EURO CERAMICS VII, PT 1-3, 2002, 206-2 : 175 - 178
[2] Effect of additives on the properties of Al2TiO5 ceramics
Korim, T
Kotsis, D
MATERIALS SCIENCE, TESTING AND INFORMATICS, 2003, 414-4 : 117 - 120
[3] Nanostructured aluminium titanate (Al2TiO5) particles and nanofibers: Synthesis and mechanism of microstructural evolution
Azarniya, Abolfazl
Azarniya, Amir
Hosseini, Hamid Reza Madaah
Simchi, Abdolreza
MATERIALS CHARACTERIZATION, 2015, 103 : 125 - 132
[4] Effects of rare-earth oxides on the microstructure and mechanical properties of Al2TiO5 flexible ceramics
Zhou, Yuqian
He, Chao
Ma, Qian
Shui, Anze
CERAMICS INTERNATIONAL, 2023, 49 (11) : 18937 - 18948
[5] Effect of nanostructuring on thermal stability and decomposition of aluminium titanate (Al2TiO5): A phase transformation study
Azarniya, Abolfazl
Hosseini, Hamid Reza Madaah
Amutha, Chinappan
Ramakrishna, Seeram
MATERIALS CHARACTERIZATION, 2021, 173
[6] Microstructure and mechanical properties of Al2O3-20 wt%Al2TiO5 composite prepared from alumina and titania nanopowders
Meybodi, Sh. Mohseni
Bafrooei, H. Barzegar
Ebadzadeh, T.
Tazike, M.
CERAMICS INTERNATIONAL, 2013, 39 (02) : 977 - 982
[7] Influence of Al2TiO5 particles on AA6061 composites fabricated by bottom pouring stir casting technique
Senthilraj, K.
Rajamurugan, G.
MATERIALS LETTERS, 2023, 338
[8] Preparation and Characterization of High-quality α-Al2O3/Al4.59Si1.41O9.7/Al2TiO5 Multiphase Material
Chen Jie
Ruan Yu-Zhong
CHINESE JOURNAL OF STRUCTURAL CHEMISTRY, 2013, 32 (07) : 1055 - 1061
[9] Preparation and Characterization of High-quality α-Al2O3 /Al4.59Si1.41O9.7/Al2TiO5 Multiphase Material
陈捷
阮玉忠
结构化学, 2013, 32 (07) : 1055 - 1061
[10] Importance of Al2TiO5 particle on the mechanical and wear performance of stir cast AA6061 composite using Central Composite Design
Senthilraj, K.
Rajamurugan, G.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2024, 60 (04) : 1331 - 1343

← 1 2 3 4 5 →