Functionally graded HA-TiO2 nanostructured composite coating on Ti-6Al-4V substrate via electrophoretic deposition

被引：43
作者：
Farnoush, Hamidreza [1 ]
Aldic, Gurol [2 ]
Cimenoglu, Huseyin [2 ]
机构：
[1] Univ Kashan, Dept Met & Mat Engn, Fac Engn, Kashan, Iran
[2] Istanbul Tech Univ, Dept Met & Mat Engn, TR-34469 Istanbul, Turkey
来源：
SURFACE & COATINGS TECHNOLOGY | 2015年 / 265卷
关键词：
Functionally graded material; Electrophoretic deposition; Hydroxyapatite; Electrochemical behavior; Bonding strength; HYDROXYAPATITE COATINGS; CALCIUM-PHOSPHATE; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; FABRICATION; SURFACE; ALLOY; TI; APATITE; GROWTH;
D O I：
10.1016/j.surfcoat.2015.01.069
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In the present study, electrophoretic deposition was carried out in the ethanol-based suspensions at the voltage of 20 V for 3 min to form functionally graded coatings of HA/TiO2 nanoparticles and HA-TiO2 nanocomposite coatings with 0, 10 and 20 wt.% of TiO2 on Ti-6Al-4V substrate. The gradual addition of HA suspension into the deposition cell containing TiO2 nanoparticles caused the functionally graded structure of HA-TiO2 coatings. The microstructure of coatings showed the lower porosities by the addition of TiO2 and using graded structure. The pull-off test results showed the highest bonding strength for the graded coating. The electrochemical impedance spectroscopic studies after in vitro tests, revealed that the total corrosion resistance of graded coating is higher than that of HA and HA-TiO2 samples. The accelerated apatite formation on functionally graded coating corresponding to inductively coupled plasma spectroscopy was attributed to the higher wettability of its surface. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：7 / 15
页数：9
相关论文
共 67 条
[1]   Strength and residual stresses of functionally graded Al2O3/ZrO2 discs prepared by electrophoretic deposition [J].
Anné, G ;
Hecht-Mijic, S ;
Richter, H ;
Van der Biest, O ;
Vleugels, J .
SCRIPTA MATERIALIA, 2006, 54 (12) :2053-2056
[2]   Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition [J].
Askari, E. ;
Mehrali, M. ;
Metselaar, I. H. S. C. ;
Kadri, N. A. ;
Rahman, Md. M. .
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2012, 12 :144-150
[3]   Electrochemical and structural evaluation of functionally graded bioglass-apatite composites electrophoretically deposited onto Ti6Al4V alloy [J].
Balamurugan, A. ;
Balossier, G. ;
Michel, J. ;
Ferreira, J. M. F. .
ELECTROCHIMICA ACTA, 2009, 54 (04) :1192-1198
[4]   Evaluation and comparison of hydroxyapatite coatings deposited using both thermal and non-thermal techniques [J].
Barry, J. N. ;
Twomey, B. ;
Cowley, A. ;
O'Neill, L. ;
McNally, P. J. ;
Dowling, D. P. .
SURFACE & COATINGS TECHNOLOGY, 2013, 226 :82-91
[5]   Sol-gel derived nanohydroxyapatite film on friction stir processed Ti-6Al-4V substrate [J].
Bastami, A. Abdi ;
Farnoush, H. ;
Sadeghi, A. ;
Mohandesi, J. Aghazadeh .
SURFACE ENGINEERING, 2013, 29 (03) :205-210
[6]   Electrophoretic deposition of biomaterials [J].
Boccaccini, A. R. ;
Keim, S. ;
Ma, R. ;
Li, Y. ;
Zhitomirsky, I. .
JOURNAL OF THE ROYAL SOCIETY INTERFACE, 2010, 7 :S581-S613
[7]   Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: A review [J].
Bose, Susmita ;
Tarafder, Solaiman .
ACTA BIOMATERIALIA, 2012, 8 (04) :1401-1421
[8]   Production and characterization of plasma-sprayed TiO2-hydroxyapatite functionally graded coatings [J].
Cannillo, V. ;
Lusvarghi, L. ;
Sola, A. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2008, 28 (11) :2161-2169
[9]   Post-deposition laser treatment of plasma sprayed titanic-hydroxyapatite functionally graded coatings [J].
Cannillo, V. ;
Lusvarghi, L. ;
Sola, A. ;
Barletta, M. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (15) :3147-3158
[10]   α-Tricalcium phosphate: Synthesis, properties and biomedical applications [J].
Carrodeguas, R. G. ;
De Aza, S. .
ACTA BIOMATERIALIA, 2011, 7 (10) :3536-3546
1234567