High-performance direct methanol fuel cell with optimized membrane electrode assembly: A theoretical approach

Methanol/water crossover through proton-exchange membranes and low cell voltage resulting from sluggish catalytic reactions are major issues that must be overcome to commercialize direct methanol fuel cells (DMFCs). Three key performance indices (low methanol crossover rate (MCO), low water transfer coefficient, and high cell voltage) can be improved by optimizing the design of the DMFC membrane electrode assembly for the cell operating conditions. Using computational techniques with a one-dimensional DMFC model, the present study proposes guidelines for constructing a high-performance DMFC with a focus on membrane electrode assembly (MEA). First, the membrane thickness is determined by balancing the MCO and ionic conductivity for both the fluorocarbon (FC) membrane and the hydrocarbon (HC) membrane. Second, the material composition of the cathode catalyst layer (cCL) is optimized by balancing charge transfer and mass transfer. Finally, the anode diffusion layer (aDL) is optimized according to the cell operating conditions. Compared to the referenced baseline cell, this optimization process is predicted to improve the cell voltage by 19% and decrease methanol crossover by 64%. (c) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.