Vacancy ion-exclusion chromatography of haloacetic acids on a weakly acidic cation-exchange resin

A new and simple approach is described for the determination of the haloacetic acids (such as mono-, di- and trichloroacetic acids) usually found in drinking water as chlorination by-products after disinfection processes and acetic acid. The new approach, termed vacancy ion-exclusion chromatography, is based on an ion-exclusion mechanism but using the sample solution as the mobile phase, pure water as the injected sample, and a weakly acidic cation-exchange resin column (TSKgel OApak-A) as the stationary phase. The addition of sulfuric acid to the mobile phase results in highly sensitive conductivity detection with sharp, and well-shaped peaks, leading to excellent and efficient separations. The elution order was sulfuric acid, dichloroacetic acid, monochloroacetic acid, trichloroacetic acid, and acetic acid. The separation of these acids depends on their pK(a) values. Acids with lower pK(a) values were eluted earlier than those with higher pK(a), except for trichloroacetic acid due to a hydrophobic -adsotption effect occurring as a side-effect of vacancy ion-exclusion chromatography. The detection limits of these acids in the present study with conductivity detection were 3.4 muM for monochloroacetic acid, 0.86 muM for dichloroacetic acid and 0.15 muM for trichloroacetic acid. (C) 2003 Elsevier Science B.V. All rights reserved.