Effect of Nanocrystalline Surface and Iron-containing Layer Obtained by SMAT on Tribological Properties of 2024 Al Alloy

被引：3
|
作者：
Wen Lei [1 ]
Yuan Yong [2 ]
Wang Yaming [3 ]
Jin Ying [1 ]
机构：
[1] Univ Sci & Technol Beijing, Natl Ctr Mat Serv Safety, Beijing 100083, Peoples R China
[2] Shanghai Spaceflight Precis Machinery Inst, Shanghai 201600, Peoples R China
[3] Harbin Inst Technol, Harbin 150001, Peoples R China
来源：
RARE METAL MATERIALS AND ENGINEERING | 2015年 / 44卷 / 06期
关键词：
aluminum alloy; surface nanocrystallization; surface mechanical attrition treatment; friction; wear; MECHANICAL ATTRITION TREATMENT; WEAR PROPERTIES; BEHAVIOR; COPPER; MICROSTRUCTURE; FRICTION; STEEL; GRAIN;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The pure and Fe-containing nanocrystalline layers were fabricated on the surface of 2024 Al alloy by surface mechanical attrition treatment (SMAT) using ceramic balls and steel balls, respectively. The friction and wear properties of 2024 Al alloy before and after SMAT were investigated by sliding against a GCr15 steel ball of 5 mm in diameter at a load of 1.5 N. The results demonstrate that the surface nanocrystalline layers with average grain sizes of 49.2 and 52.1 nm can be obtained by using ceramic balls and steel balls, respectively, when treated for 30 min. Moreover, a 5 mu m thick surface layer containing Fe is also introduced into the Al nanocrystalline surface when treated using steel balls. The wear resistance of 2024 Al alloy is improved due to the combination of grain refinement, increased hardness and lubrication effect of iron-containing layer.
引用
收藏
页码：1320 / 1325
页数：6
相关论文
共 50 条
  • [41] Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy
    Aleksandar Vencl
    Biljana Bobić
    Filip Vučetić
    Petr Svoboda
    Vladimir Popović
    Ilija Bobić
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [42] Effect of rare earth oxides on electrochemical properties of infiltration layer on Ti6Al4V alloy surface
    Li, Nianqiang
    Tang, Zikun
    Duan, Yonghua
    Feng, Zhiqi
    Ma, Lishi
    Zheng, Shanju
    Peng, Mingjun
    Li, Mengnie
    SURFACE & COATINGS TECHNOLOGY, 2025, 503
  • [43] Effect of Carbon Ion Implantation and Xenon Ion Irradiation on the Tribological Properties of Titanium and Ti6Al4V Alloy
    Budzynski, P.
    Kaminski, M.
    Surowiec, Z.
    Turek, M.
    Wiertel, M.
    ACTA PHYSICA POLONICA A, 2022, 142 (06) : 713 - 722
  • [44] Elevation of tribological properties of alloy Ti – 6% Al – 4% V upon formation of a rutile layer on the surface
    A. Astarita
    M. Durante
    A. Langella
    A. Squillace
    Metal Science and Heat Treatment, 2013, 54 : 662 - 666
  • [45] Effect of ingot grain refinement on the tensile properties of 2024 Al alloy sheets
    Wei Haigen
    Xia Fuzhong
    Wang Mingpu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 682 : 1 - 11
  • [46] Effect of Parameters of Thermal-Rate Treatment of Melt on Iron-Containing Phases in Alloy Al – 15% Si – 2.7% Fe
    Qinglei Wang
    Haoran Geng
    Fulan Wang
    Xiangze Lin
    Chongyang Wang
    Metal Science and Heat Treatment, 2016, 58 : 405 - 410
  • [47] Interfacial structure and mechanical properties of surface iron-nickel alloying layer in pure iron fabricated by surface mechanical attrition alloy treatment
    An, Yan-li
    Du, Hua-yun
    Wei, Ying-hui
    Wang, Ning
    Hou, Li-feng
    Lin, Wan-ming
    MATERIALS & DESIGN, 2013, 46 : 627 - 633
  • [48] Effect of low-temperature plasma carburizing on surface topography, mechanical and tribological properties of sintered iron and nitrided sintered iron
    Lamim, Thiago de Souza
    Anselmo, Leticia Maria
    Bendo, Tatiana
    Bernardelli, Euclides Alexandre
    Binder, Cristiano
    Klein, Aloisio Nelmo
    Biasoli de Mello, Jose Daniel
    TRIBOLOGY INTERNATIONAL, 2022, 168
  • [49] Effect of surface roughness on tribological properties of TiB2/Al composites
    Tian, S. F.
    Jiang, L. T.
    Guo, Q.
    Wu, G. H.
    MATERIALS & DESIGN, 2014, 53 : 129 - 136
  • [50] Thermal treatment effect on the mechanical, tribological and corrosion properties of Ni-W alloy obtained by direct and pulse plating electrodeposition
    Imaz, N.
    Diez, J. A.
    Pellicer, E.
    Sort, J.
    Grande, H.
    Garcia-Lecina, E.
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2017, 95 (01): : 31 - 38
12345