Phase Transformation Kinetics of a FCC Al0.25CoCrFeNi High-Entropy Alloy during Isochronal Heating

被引:4
作者
Wang, Jun [1 ]
Wei, Chen [1 ]
Yang, Haoxue [1 ]
Guo, Tong [1 ]
Xu, Tingting [1 ]
Li, Jinshan [1 ]
机构
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China
关键词
high-entropy alloy; phase transformation; kinetics; isochronal heating; MECHANICAL-PROPERTIES; IN-SITU; MICROSTRUCTURE; EVOLUTION; DESIGN;
D O I
10.3390/met8121015
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The phase transformation kinetics of a face-centered-cubic (FCC) Al0.25CoCrFeNi high-entropy alloy during isochronal heating is investigated by thermal dilation experiment. The phase transformed volume fraction is determined from the thermal expansion curve, and results show that the phase transition is controlled by diffusion controlled nucleation-growth mechanism. The kinetic parameters, activation energy and kinetic exponent are determined based on Kissinger- Akahira-Sunose (KAS) and Johnson-Mehl-Avrami (JMA) method, respectively. The activation energy and kinetic exponent determined are almost constant, indicating a stable and slow speed of phase transition in the FCC Al0.25CoCrFeNi high-entropy alloy. During the main transformation process, the kinetic exponent shows that the phase transition is diffusion controlled process without nucleation during the transformation.
引用
收藏
页数:9
相关论文
共 33 条
[1]   Twinning-induced strain hardening in dual-phase FeCoCrNiAl0.5 at room and cryogenic temperature [J].
Bonisch, M. ;
Wu, Y. ;
Sehitoglu, H. .
SCIENTIFIC REPORTS, 2018, 8
[2]   A comparison of isoconversional and model-fitting approaches to kinetic parameter estimation and application predictions [J].
Burnham, A. K. ;
Dinh, L. N. .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2007, 89 (02) :479-490
[3]   Microstructural development in equiatomic multicomponent alloys [J].
Cantor, B ;
Chang, ITH ;
Knight, P ;
Vincent, AJB .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :213-218
[4]   Effect of one-step recrystallization on the grain boundary evolution of CoCrFeMnNi high entropy alloy and its subsystems [J].
Chen, Bo-Ru ;
Yeh, An-Chou ;
Yeh, Jien-Wei .
SCIENTIFIC REPORTS, 2016, 6
[5]   Design of new face-centered cubic high entropy alloys by thermodynamic calculation [J].
Choi, Won-Mi ;
Jung, Seungmun ;
Jo, Yong Hee ;
Lee, Sunghak ;
Lee, Byeong-Joo .
METALS AND MATERIALS INTERNATIONAL, 2017, 23 (05) :839-847
[6]   In-situ study of crack initiation and propagation in a dual phase AICoCrFeNi high entropy alloy [J].
Ghassemali, Ehsan ;
Sonkusare, Reshma ;
Biswas, Krishanu ;
Gurao, Nilesh P. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 710 :539-546
[7]   Microstructure and properties of bulk Al0.5CoCrFeNi high-entropy alloy by cold rolling and subsequent annealing [J].
Guo, Tong ;
Li, Jinshan ;
Wang, Jun ;
Wang, William Yi ;
Liu, Yi ;
Luo, Ximing ;
Kou, Hongchao ;
Beaugnon, Eric .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 729 :141-148
[8]   Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2 [J].
Gwalani, B. ;
Soni, V. ;
Choudhuri, D. ;
Lee, M. ;
Hwang, J. Y. ;
Nam, S. J. ;
Ryu, H. ;
Hong, S. H. ;
Banerjee, R. .
SCRIPTA MATERIALIA, 2016, 123 :130-134
[9]   Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured AlxCoCrFeNi high entropy alloys [J].
Joseph, Jithin ;
Hodgson, Peter ;
Jarvis, Tom ;
Wu, Xinhua ;
Stanford, Nicole ;
Fabijanic, Daniel Mark .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 733 :59-70
[10]   Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method [J].
Li, Mu ;
Gazquez, Jaume ;
Borisevich, Albina ;
Mishra, Rohan ;
Flores, Katharine M. .
INTERMETALLICS, 2018, 95 :110-118