Recent Advances on Drawing Technology of Ultra-Fine Steel Tire Cord and Steel Saw Wire

被引：9
作者：
Chen, Changyong [1 ]
Sun, Meng [2 ]
Wang, Bao [1 ]
Zhou, Jianan [1 ]
Jiang, Zhouhua [2 ]
机构：
[1] Wuhan Univ Sci & Technol, Sch Met & Mat, Wuhan 430081, Peoples R China
[2] Northeastern Univ, Sch Met, Shenyang 110819, Peoples R China
来源：
METALS | 2021年 / 11卷 / 10期
关键词：
steel tire cord; steel saw wire; iron oxide scale; copper plating process; drawing technology; drawing die; RUBBER COMPOUNDS; ALLOY COATINGS; CARBIDE DIES; ZN-NI; ADHESION; CORROSION; MICROSTRUCTURE; MECHANISM; EVOLUTION; BEHAVIOR;
D O I：
10.3390/met11101590
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Steel tire cord and steel saw wire represent typical precision pearlitic steel wire rods of wire products; it is a very important solar energy material with a diameter about 50 mu m. This paper mainly discusses the research progress of the wire rod drawing process, and its main contents are as follows: First section-the control of the wire rod surface quality is summarized, including the thickness of the surface decarburization layer, the phase composition and thickness of the surface iron oxide scale, and the removal of surface iron oxide scale. Then, the research progress of the wire rod water bath treatment process during sorbitization is summarized. In addition, the development of brass plating technology for steel wire is summarized, including copper plating technology, coating phase composition, etc. Furthermore, the development of steel wire drawing methods is summarized. Finally, the development of the dies used in steel wire drawings is summarized.</p>
引用
收藏
页数：33
相关论文
共 89 条
  • [1] Buytaert G., 2015, RUBBER WORLD, V252, P20
  • [2] Study of Cu-Zn-Co ternary alloy-coated steel cord in cobalt-free skim compound
    Buytaert, Guy
    Luo, Yiwen
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2014, 28 (16) : 1545 - 1555
  • [3] Cai H.Y., 2005, METALWORK, V3, P35, DOI [10.3969/j.issn.1003-4226.2005.03.018, DOI 10.3969/J.ISSN.1003-4226.2005.03.018]
  • [4] Cai W, 2011, DEV HIGH CARBON WIRE, DOI [10.7666/d.y1921115, DOI 10.7666/D.Y1921115]
  • [5] Cao A.R., 2010, MET HEAT TREAT, V9, P51
  • [6] Cao X.L., 2010, MET PROD, V4, P39, DOI [10.3969/j.issn.1003-4226.2010.04.011, DOI 10.3969/J.ISSN.1003-4226.2010.04.011]
  • [7] An investigation on the corrosion of brass-coated steel cords for tyres by electrochemical techniques
    Chanel, S
    Pébère, N
    [J]. CORROSION SCIENCE, 2001, 43 (03) : 413 - 427
  • [8] Study on formation of "easy to remove oxide scale" during mechanical descaling of high carbon wire rods
    Chattopadhyay, A.
    Kumar, P.
    Roy, D.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2009, 203 (19) : 2912 - 2915
  • [9] Chen W, 2006, P INT C EMB SYST APP, P183
  • [10] Cheng S.P., 2015, INFLUENCE CU ZN COAT
123456789