Application of the laser ablation for conservation of historical paper documents

Laser ablation was applied for surface cleaning and spectroscopic diagnostic, of historical paper documents and model samples in the framework of the conservation projects. During cleaning the spectra of ablation products were recorded by means of the LIBS technique which allowed for nearly non-destructive identification of surface layers such as contaminants, substrate and pigments. For consecutive laser pulses a strong decrease of band intensities of the emission lines of Ca, Na, K, Al and Fe ascribed to contaminants were observed. The effect was used for monitoring of the cleaning progress of stained paper. For surface cleaning and spectra excitation the Q-switched Nd:YAG laser of 6 ns pulsewidth operating at wavelengths of 266, 355, 532, and 1064 urn and of fluence selected from the range 0.3-0.9 J/cm(2) was applied. The ablation parameters were optimized in agreement with the literature and the results were confirmed by surface studies and testing of the mechanical and chemical properties, and also by the response to the ageing process of the paper substrate. In case of the model paper irradiated in the UV range at 266 and 355 nm a visual inspection revealed local damages of the cellulose fibers accompanied by a decrease of the mechanical strength of the substrate. The effect was more pronounced after artificial ageing. The best results were obtained for samples irradiated at 532 nm and at laser fluence below the damage threshold of 0.6 J/cm(2) which is in agreement with literature. (c) 2007 Elsevier B.V. All rights reserved.