An overview on the dehydrogenation of alkylbenzenes with carbon dioxide over supported vanadium-antimony oxide catalysts

Utilization of carbon dioxide as a soft oxidant for the catalytic dehydrogenation of ethylbenzene (CO2-EBDH) has been recently attempted to explore a new technology for producing styrene selectively. This article summarizes the results of our recent attempts to develop effective catalyst systems for the CO2-EBDH on the basis of alumina-supported vanadium oxide catalysts. Its initial activity and on-stream stability were essentially improved by the introduction of antimony oxide as a promoter into the alumina-supported catalyst. Insertion of zirconium oxide into alumina support substantially increased the catalytic activity. Modification of alumina with magnesium oxide yielded an increase of catalyst stability of alumina-supported V-Sb oxide due to the coking suppression. Carbon dioxide has been confirmed to play a beneficial role of selective oxidant in improving the catalytic performance through the oxidative pathway, avoiding excessive reduction and maintaining desirable oxidation state of vanadium ion (V5+). The positive effect of carbon dioxide in dehydrogenation reactions of several alkylbenzenes such as 4-diethylbenzene, 4-ethyltoluene, and iso- and n-propylbenzenes was also observed. Along with the easier redox cycle between fully oxidized and partially reduced vanadium species, the optimal surface acidity of the catalyst is also responsible for achieving high activity and catalyst stability. It is highlighted that supra-equilibrium EBDH conversions were obtained over alumina-supported V-Sb oxide catalyst in CO2-EBDH as compared with those in steam-EBDH in the absence of carbon dioxide.